Hifonix brutus bx1501d

[Relax 10+ year member]

I'm running my Brutus at 1000 @2 ohms to 2 12's rated for 500wrms each. Gain at about 2/3 power with out any extra boost or loud, and it goes into protect pretty easily. Could there be something worng with the heat sink, and how easy is that to fix? I haven't pulled it apart yet but i will if it's a noticeable problem.

Click to read more...

 

[infamous_e46 5,000+ posts]

1. ur subs at .5ohm ???

2. ur voltage is dropping really low

3. ur amp is now broken because of 1 and 2

what impedance are your moofers

 

[Relax 10+ year member]

D2

 

[Relax 10+ year member]

wired in series.

 

[infamous_e46 5,000+ posts]

double check wiring because its either 2ohm or .5ohm and that amp shouldnt break a sweat at 2ohm

 

[Relax 10+ year member]

yeah should be at 2 ohms, if that is in fact wired correctly at 2 ohms, any idea what the problem could be? That amp is stable at 1 ohm

 

[Mass Car Audio 10+ year member]

yeah should be at 2 ohms, if that is in fact wired correctly at 2 ohms, any idea what the problem could be? That amp is stable at 1 ohm

Poor voltage.

 

[Relax 10+ year member]

What would be a better first step to increase voltage?

1. Upgrade big 3

2. Upgrade/add powercell

 

[captaincheesey 10+ year member]

What would be a better first step to increase voltage?1. Upgrade big 3 #1

2. Upgrade battery #2

3. add powercell #3

In that order