hey

[sniper007 10+ year member]

Can anybody design me an enclosure for my truck, there 2 12' Audiobahn AW1200Q Subwoofers. Ported would be awesome but if its not possible sealed would do ill just add polyfill at the end. The demensions are 58" width, 14" height, 9" depth.

Pics of my truck

As you can see the F**kin middle seat doesnt move so i gotta work past that and use what i got. All i want is the best box thats going make my 2 12's sound the best they can. Looking mostly for SPL.

Click to read more...

 

[sniper007 10+ year member]

bump - edited measurements

 

[kickerlivinloud 10+ year member]

I highly doubt you will be able to port this enclosure. I did a quick calc and found you have 3.06ft^3 to work with That does not include sud displacement, so you would probably have around 2.7Ft^3 roughly. (I'm not sure exactly how much disp the bahns are). If you would like a setchup I will do one for ya, just let me know..

Jon

 

[ultimate157 5,000+ posts]

Yea ... You're only going to be able to seal them. 3 cubes sealed is good for 2 12's.

 

[Duke 10+ year member]

Those subs do good in 1.2-1.3 cubes each if you can manage to get it tuned to 35 hz. A single 4 inch port works well for those.

 

[berserker 10+ year member]

Subs fire forward and ports fire sideways towards passenger side with two 4 inch ports 14.125 long each. The net volume is a little less than what Audiobling recommends, their space saver bass design, but is close to it.

box:

Vb: 2.32 Ft^3
Fb: 40 Hz
Av: 25.12 In^2
Lv: 14.125 In
 
3.065 gross
0.540 sub disp.
0.205 port disp.
_____
2.320 net
cut list:

top: 9 x 58
bottom: 9 x 58
baffle: 12.5 x 56.5
back: 12.5 x 56.5
l side: 9 x 12.5
r side: 9 x 12.5
ports (2): 4 x 14.125

 

[Duke 10+ year member]

Subs fire forward and ports fire sideways towards passenger side with two 4 inch ports 14.125 long each. The net volume is a little less than what Audiobling recommends, their space saver bass design, but is close to it.


box:

Vb: 2.32 Ft^3
Fb: 40 Hz
Av: 25.12 In^2
Lv: 14.125 In
 
3.065 gross
0.540 sub disp.
0.205 port disp.
_____
2.320 net
cut list:

top: 9 x 58
bottom: 9 x 58
baffle: 12.5 x 56.5
back: 12.5 x 56.5
l side: 9 x 12.5
r side: 9 x 12.5
ports (2): 4 x 14.125

Sniper, do it and I think you'll like it.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[sniper007 10+ year member]

hmm.... can any1 do a visual on how the box will more or less look like with that design?

 

[Duke 10+ year member]

Would the ports have enough room to work correctly?

 

[Duke 10+ year member]

How much space would be between the ports and the side of the vehicle?

 

[sniper007 10+ year member]

umm... well the passengar seat is adjustable so i dont think itll be a problem.

 

[sniper007 10+ year member]

unless thats not that question ur asking.

 

[sniper007 10+ year member]

How much space would be between the ports and the side of the vehicle?

how much would be recommended?

 

[sniper007 10+ year member]

bump

 

[Duke 10+ year member]

Well, I'd have at least one diameter away from the nearest surface, so 4".