dam your getting pretty decent voltage running on all stockAnd yes, i do have my orion running w/o the big 3 and with stock alt, i have the gain set for 2500w and its also running at .75ohms, it never drops below 12v when im crancking it REALLY REALLY hard, usually it just stays in the 13.5v's. I tested my batt today with my car off and it read 13v with the dmm.
Money makes the world go round //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif :greedy:aahaha...since when/why is he allowed back as chinny?
Actually my car doesnt rattle that much since i doesnt hit the lows that the XXX used to hit, but when the MT hits the lows they hit harder than the XXX's just that they arent that low, but SQ is 10/10 in my book, its 9/10 compared to my xxx15 i had before. What rattles alot now is my windshield and wipers.Money makes the world go round //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif :greedy:
i keed, i keed.
also, chinny did you fix your rattling or whatever? since the one 15" was too much. Now you're rattling houses hows the truck holding up:laugh:
Yeah, im always looking at my volts and when it goes down too much i lower it. But iam going to get an alt soon.we had a guy buy an orion 2500d, he had 4 gauge front to rear, and a little 4 channel amp back there, he brought the amp back two weeks later, it was dead.. sent it to orion
ends up, died from low voltage, is what orion told us... so beware i guess
nice looking setup chinny, looks like you're making a turn around on these boards.
tighten up those wires : )
You should see when i get my extreme body kit and 20's and lower the blazer. It will look nice like yours //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifNice!!!!