Ground Shaker Boxes

[rzj90059 10+ year member]

Ey, what do you guys think of these boxes, i mean specifically the 12" ported box. Do you guys reccomend this one for a sq application or can i get more for my money

Click to read more...

 

[Max_Power 10+ year member]

Usually for sound quality applications, it is best to use sealed boxes. If you must use a ported box, it is usually best to build your own. The thing with pre-fab boxes is that they are usually tuned to a higher frequency than a custom built box. The boxes sound alright for rap, but not much else. the thing they accel at is usually output though.

For sound quality applications where ported boxes are required look for a lower tuning frequency like 35hz or below.

 

[supa_c 5,000+ posts]

Where are you in LA ?

Weve got a bunch of guys not far from you that could make something way more specific to your subwoofer than any prefab.

 

[photocrazy8 10+ year member]

i can build and i will drive it down to LA for you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[PowerNaudio 10+ year member]

i have to agree, if your looking for SQ going with a custom enclosure will be your best route. manipulating the subwoofer output by building the proper enclosure. will keep you from having to use filters to gain close but not similar result and have better control over the freq responce of the sub. then you would with an enclosure with unknow parameters. prefabs enclosures like stated above are tuned high. and built in that way to try and satisfy the most general applications.

 

[rzj90059 10+ year member]

Im In Watts, By The 105 Freeway, In Between The 710 And 110 Freeways, And I Have Mtx 8000 Subs, 2 Of Them, Can Someone Estimate A Price For Me For A Custom Box For These

 

[rzj90059 10+ year member]

These are the specs for my subs

 

[PowerNaudio 10+ year member]

These are the specs for my subs

those are specs for a sub enclosure. which look pretty decent.