Got one of my Rockford amp and a few other things (start of my little build)

[jimmy221990]

So far I have two 15 inch american bass XFL 1544 dual four ohm. 1 american bass VFL 150.1.

Rockford T2652-S components that will be powered by a Rockford Fosgate P400-4.

Rockford Fosgate RFK1 1/0 AWG Power Only Install Kit. Rockford Fosgate RFK4X 4 AWG Complete Amplifier Install Kit

Rockford Fosgate RFIT-16 16 feet Premium Dual Twist Signal Cable

GLS Audio Premium 12 Gauge 50 Feet Speaker Wire for subs (might get 10 gauge and use the 12 for the components instead)

That was I have at the moment.

I will be ordering a mechman alternator, having a bigger box built, and buying everything for buss bars. On top of that I have about $1,500 to complete this build. Cant wait to start the install but its going to be a bit cause car audio is not cheap.

Comment tell me what you think

220 Oz magnet 1000 RMS (under-rated)



Dont look like much but the sub is a monster

http://imageshack.us/photo/my-images/5/imag0829.jpg/

Rockford Fosgate P400-4. Crazy how heavy this little amp is.



1,400 max power!! Now thats under-rated



RF 4 AWG for the T2 speakers







RF 1/0 ground. Stuff is flexable and very well made



Ha thought I would throw my 2013 PC build. Cost my $2,300 to build

Click to read more...

 

[4bannger 10+ year member]

I love fockford bumpin them for about a year and still stayin strong

 

[jimmy221990]

I love fockford bumpin them for about a year and still stayin strong

Yea Rockford fosgates guilty is top notch. If you have never seen there 1/0 Gauge wire you should get some.

 

[Silverado SS 10+ year member]

those xfls could take 1800+ RMS each and that BBox isnt to bad i had one i would guess the tuning is around 37-39hz though so it has nice range but wont kill the lows like those subs should good luck looks good!

 

[jimmy221990]

Thanks man. I just hope the AMP holds up and puts on he kind of power im looking for

 

[cablguy184 10+ year member]

Interesting ... Tuned in for the build

 

[jimmy221990]

Interesting ... Tuned in for the build

Thanks man I still got a bit to go but I have a big order coming in next with and keep updating

Awesome! excited to see thebuild!

Thanks glad you like it. I cant wait for the build, but we all know how it works, you have to have money to build a system and everything cost money lol

 

[jimmy221990]

Little update. Ordered one of my three batteries. Will post some pics on the 16th

 

[jimmy221990]

Another update just ordered all this check it out. Install pictures and set up coming soon.

Amazon.com: Sony CDXGT565UP CD Receiver with Pandora Link: Car Electronics

Irwin Industrial Tools 2078300 8-Inch Self-Adjusting Wire Stripper with ProTouch Grips - Amazon.com

DEWALT DC970K-2 18-Volt Drill/Driver Kit - Amazon.com

Amazon.com: SHW510G-50 - Stinger 50FT 10GA Matte Gray Hyper Twisted Speaker Wire: Car Electronics

Amazon.com: Stinger RKX36B Expert Bulk Pack: Electronics

Amazon.com: Stinger SVMB Voltage Gauge - Blue Display: Car Electronics

Amazon.com: Rockford Fosgate 200 Amp ANL Fuse: Car Electronics

Amazon.com: Rockford Fosgate Positive/Negative Battery Terminal (2) 1/0 AWG/4 AWG Input (2) 8 AWG Inputs: Car Electronics

Amazon.com: Kinetik KHC2000 2000-Watt 12-Vault Power Cell: Car Electronics

Amazon.com: Rockford Fosgate 300 Amp ANL Fuse: Car Electronics

Amazon.com: Rockford Fosgate Inline ANL or Maxi Fuse Holder for 1/0 AWG or 4 AWG Wire: Car Electronics

Amazon.com: Rockford Fosgate RFK1 1/0 AWG Power Only Install Kit: Electronics

 

[jimmy221990]

Just got my XS Power D5100 In. Its smaller then I though but its still heavy

 

[jimmy221990]

Got my two Kinetik HC2000 and my tops for the XS Power D5100

The build will start very soon so stay tuned.

 

[jimmy221990]

Its been a while since I did an update so I thought I would share a little progress. I redid the box but its not done yet. I still have another coat of trunk liner and Im painting the port white. This box is just holding me over until I get the money to have one built or build one myself.

 

[jimmy221990]

 

[CaddieJapan 10+ year member]

Custom enclosure would definitely hit better. Nice choice on the gear though, just not a fan of the prefabs. Nice work on the build as well.

 

[jimmy221990]

Custom enclosure would definitely hit better. Nice choice on the gear though, just not a fan of the prefabs. Nice work on the build as well.

Thanks and yea I will have a custom box soon but for now this is what I have to work with.