Item(s) for Sale:
Zapco Reference 1100.1
Item(s) Description/Condition:
Used. Good. Amp has some scratches on top. The heatsink is slightly bent and has some dings and marks. The remote terminal screw is from a different amp so the color is mismatched. One of the speaker terminal screws is missing and has been replaced by a screw with a ring terminal. The plastic on the left side of the ground terminal is cracked off. The logo has been flipped around to face the other direction. Besides the cosmetics this amp is solid. Sounds awesome. Includes the blt and cable. The cable has been wrapped in plastic flex loom and 3m electrical tape.
Total Power (14.4V @ 1kHz) Power
Dynamic (4W mono) 1450 Watts
Rated Power T.H.D.+N
825 watts x 1@ 4W
1100watts x 1 @ 2W
Frequency Response 20 – 20kHz, + 0 / - .5dB
S/N Ratio > 90dB
Transient Distortion (4W, 40W)
Slew Rate 40 V/mS
Damping Factor > 700 @ 4W
Input Sensitivity
Balanced (DIN) 250mV – 10V
Max. Current Requirements 135 Amps @ 900 watts
Idle Current 1.5 Amps
Dimensions 23”L x 7.5”W x 1.95”H
Price:
290 shipped. Free heatshrink included. I have a 1/0 tsunami fuse holder with fuse I will throw in.
Shipping and Miscellaneous Item Information:
Free.
hERP DeRP McNerP.
Item Pictures:
Zapco Reference 1100.1
Item(s) Description/Condition:
Used. Good. Amp has some scratches on top. The heatsink is slightly bent and has some dings and marks. The remote terminal screw is from a different amp so the color is mismatched. One of the speaker terminal screws is missing and has been replaced by a screw with a ring terminal. The plastic on the left side of the ground terminal is cracked off. The logo has been flipped around to face the other direction. Besides the cosmetics this amp is solid. Sounds awesome. Includes the blt and cable. The cable has been wrapped in plastic flex loom and 3m electrical tape.
Total Power (14.4V @ 1kHz) Power
Dynamic (4W mono) 1450 Watts
Rated Power T.H.D.+N
825 watts x 1@ 4W
1100watts x 1 @ 2W
Frequency Response 20 – 20kHz, + 0 / - .5dB
S/N Ratio > 90dB
Transient Distortion (4W, 40W)
Slew Rate 40 V/mS
Damping Factor > 700 @ 4W
Input Sensitivity
Balanced (DIN) 250mV – 10V
Max. Current Requirements 135 Amps @ 900 watts
Idle Current 1.5 Amps
Dimensions 23”L x 7.5”W x 1.95”H
Price:
290 shipped. Free heatshrink included. I have a 1/0 tsunami fuse holder with fuse I will throw in.
Shipping and Miscellaneous Item Information:
Free.
hERP DeRP McNerP.
Item Pictures:
