I really hate to do this but you know how it goes. What more can I say than this amp is absolutely top of the line in every way!! Were talking flagship Zapco here boys and girls - hand made in the good ole USA!!
I've owned this amp for 3 months and have taken care of it like my own child. It is in very good shape....8.5/10 aesthetically and 10/10 functionally (both conservative estimates).
As you can see the serial # is still intact. This is important because without it, it is illegal for Zapco to even touch it. The amp was originally purchased through a Zapco AD.
I comes with it's original box, manual, the SLB-TP4 and a 3' male-male din Symbilink cable necessary to run the amp balanced. With this, you can run up to a balanced 18v signal into the amp. This virtually elliminates all noise.
Retail on this amp is $1369.
Specs:
75 Watts X 2 @ 4 ohms Stereo
150 Watts X 2 @ 2 Ohms Stereo
330 Watts X 2 @ 1 Ohms Stereo
150 Watts X 1 @ 8 Ohms Mono
300 Watts X 1 @ 4 Ohms Mono
660 Watts X 1 @ 2 Ohms Mono
The amp is stable into 1 Ohm stereo and 2 Ohms mono
T.H.D. + Noise:
Frequency Response: 20Hz - 20kHz; +0 dB/-0.32 dB
S/N Ratio: >100dB
Transient Distortion:
Slew Rate: >28V/uS
Damping Factor: >1000
Input Sensitivity: 1-4 Volts or 4-16 Volts
Dimensions: 17.5"L x 8.75"W x 2.375"H
The .pdf's for the amp and the Symbilink system are available from Zapco's website www.zapco.com
Pics:
Price is $480 shipped in the US via FedEx Ground with a declared value of $1000. If you wan't to save a few bucks and send a USPS money order then it's yours for $465 shipped.
If you have any questions, please feel free to drop me a PM. I have excellent feedback. You get what you pay for //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
I've owned this amp for 3 months and have taken care of it like my own child. It is in very good shape....8.5/10 aesthetically and 10/10 functionally (both conservative estimates).
As you can see the serial # is still intact. This is important because without it, it is illegal for Zapco to even touch it. The amp was originally purchased through a Zapco AD.
I comes with it's original box, manual, the SLB-TP4 and a 3' male-male din Symbilink cable necessary to run the amp balanced. With this, you can run up to a balanced 18v signal into the amp. This virtually elliminates all noise.
Retail on this amp is $1369.
Specs:
75 Watts X 2 @ 4 ohms Stereo
150 Watts X 2 @ 2 Ohms Stereo
330 Watts X 2 @ 1 Ohms Stereo
150 Watts X 1 @ 8 Ohms Mono
300 Watts X 1 @ 4 Ohms Mono
660 Watts X 1 @ 2 Ohms Mono
The amp is stable into 1 Ohm stereo and 2 Ohms mono
T.H.D. + Noise:
Frequency Response: 20Hz - 20kHz; +0 dB/-0.32 dB
S/N Ratio: >100dB
Transient Distortion:
Slew Rate: >28V/uS
Damping Factor: >1000
Input Sensitivity: 1-4 Volts or 4-16 Volts
Dimensions: 17.5"L x 8.75"W x 2.375"H
The .pdf's for the amp and the Symbilink system are available from Zapco's website www.zapco.com
Pics:
Price is $480 shipped in the US via FedEx Ground with a declared value of $1000. If you wan't to save a few bucks and send a USPS money order then it's yours for $465 shipped.
If you have any questions, please feel free to drop me a PM. I have excellent feedback. You get what you pay for //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
