I have two zapco studio series for sale, Studio204 and Studio300x. I don't have pix yet, i'll post pix if there is real interested in them. Amps function perfectly, there are smudges and scratches from normal use. Price is shipped within the Cont. US. Anywhere else then i'll have to get a shipping quote.
Here's the spec for the Studio300x: 250shipped OBO
Output Power 150 watts/ch @ 4W, 20Hz-20kHz
230 watts/ch @ 2W, 20Hz-20kHz
T.H.D. + Noise S/N Ratio >105dB
Dynamic Headroom .6dB @ 2 ohm load
Separation >70dB
Damping Factor >700 @ 4 ohms, 350 @ 2 ohms
Input Type Fully balanced differential REF GND
Input Sensitivity .25 - 5.0 Volts, variable
Maximum Input Level 10 Volts R.M.S.
Input Impedance 20K ohms
Crossover Range 30Hz - 720Hz
Crossover Slope Low Pass 12dB, 24dB/octave
Hi Pass 12dB/octave
Hi Pass T.H.D. + Noise Hi Pass Separation >85dB
Hi Pass S/N Ratio >120dB
Maximum Output Level 10 Volts R.M.S.
Power Requirements 60 Amperes max. @ 2 ohms
Fuse Rating Dual 20 Amperes - Automotive blade type
Minimum Load 2 ohms stereo
Idle Current 1.6 Amperes
Dimensions 16”L x 5-7/8”W x 2-1/2”H
for the Studio204, I'd like 225shipped OBO . Unfortunately i can't get paste the specs from Zapco's website rite now. But just go to zapco.com, click "products"-->heritage-->studio204 then u should get the PDF file regarding the amps. U can do the same for the 300x.
Only trade i'm considering right now is the alpine PDX 4.150, other than that, money talks //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif
I'll clean the amps before sending them out //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Here's the spec for the Studio300x: 250shipped OBO
Output Power 150 watts/ch @ 4W, 20Hz-20kHz
230 watts/ch @ 2W, 20Hz-20kHz
T.H.D. + Noise S/N Ratio >105dB
Dynamic Headroom .6dB @ 2 ohm load
Separation >70dB
Damping Factor >700 @ 4 ohms, 350 @ 2 ohms
Input Type Fully balanced differential REF GND
Input Sensitivity .25 - 5.0 Volts, variable
Maximum Input Level 10 Volts R.M.S.
Input Impedance 20K ohms
Crossover Range 30Hz - 720Hz
Crossover Slope Low Pass 12dB, 24dB/octave
Hi Pass 12dB/octave
Hi Pass T.H.D. + Noise Hi Pass Separation >85dB
Hi Pass S/N Ratio >120dB
Maximum Output Level 10 Volts R.M.S.
Power Requirements 60 Amperes max. @ 2 ohms
Fuse Rating Dual 20 Amperes - Automotive blade type
Minimum Load 2 ohms stereo
Idle Current 1.6 Amperes
Dimensions 16”L x 5-7/8”W x 2-1/2”H
for the Studio204, I'd like 225shipped OBO . Unfortunately i can't get paste the specs from Zapco's website rite now. But just go to zapco.com, click "products"-->heritage-->studio204 then u should get the PDF file regarding the amps. U can do the same for the 300x.
Only trade i'm considering right now is the alpine PDX 4.150, other than that, money talks //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif
I'll clean the amps before sending them out //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
