Sold FS: Xtant X1244 & X124

[ugmoe2000 10+ year member]

I have a BNIB Xtant X1244 which is the 4 ohm DVC version capable of

handling 500w rms, never seen a watt. Bought it new off of ebay, my

mind changed about the system so it's up for sale now... these things

go for 300 new so I'll go with 179 + shipping.

I have another sub, an Xtant X124 which is the 4 ohm SVC version

capable of handling 500w rms. I bought it off of ebay. It was

mis-advirtised as the DVC model so I had to file a Paypal claim, yada

yada yada I ended up /w the sub now I'm just trying to make some of my

money back. Also has the shiny aluminum scraped off in a pretty large

way on the cone. The scrape doesn't effect performance though and it

would still look pretty sick mounted inverted so you could see just

the magnet (which is still blingin /w chrome). Since there's a scrape

on the cone I'll let this one go for $79 + shipping.

References can be found under the Ebay name of : Ugmoe2000

I've also done some deals with djdilliodon and bloodthirster.

Pics will be taken on request.

Click to read more...

 

[ugmoe2000 10+ year member]

This is the X1244 it's in Perfect shape as you can tell.

Another pic of the X1244.

The magnet of the X1244, it has a plastic sticker on it for protection that needs to be taken off b4 you install the sub. It's still on in the pic the magnet is in perfect shape.

Another shot of the magnet. Can you tell I get picture crazy.

The first shot of the X124 you can see the scrape down towards the bottom.

Another shot of the cone.

You can tell here that the sub was previously used because of the excess silicone left on the underside of the gasket. I never noticed this previously or I would have called it used from the beginning.

 

[ugmoe2000 10+ year member]

morning bump

 

[ugmoe2000 10+ year member]

ttt

 

[ravens9322 10+ year member]

someone else sold 2 xtant x1244's for 120 + shipping

 

[ugmoe2000 10+ year member]

i don't appreciate the post dump but were they brand new? was the cone not scraped... because cone scraping is a REALLY common problem for these speakers if they're not taken care of. one good scrap significantly injures the value of the woofer. My x1244 is in perfect condition. Never seen a watt of power, been in storage.

 

[ravens9322 10+ year member]

i wasn't post dumping at all...i dont know much about this sub so i was basically asking why the prices were so different. sorry

 

[ugmoe2000 10+ year member]

no prob... just lettin you know about some of the common problems... also I saw a set for sale on ebay that was in descent shape but the tinsel leads had been seperated from the cone, those were selling for $50 a piece used... that's the cheapest I've ever seen them but they needed to be repaired. Anyone who has interest in this sub will more than likely know that it's a good price. Online you can't buy these new for anything less than 300 (sounddomain.com). I'm also looking for trades on these... Lookin for an RE XXX 10,12, 15, that needs to be reconed or a new RE XXX 18. (I'll throw down cash where applicable).

 

[ugmoe2000 10+ year member]

ttt