Pictures Up
Up for sale is my RE SX 12 it's a D2 and it's the old model some minor cosmetic damage, slight tear in dustcap that has been glued and sealed back up but 10/10 as far it working- $140+shipping
Electrical Q Value -Qes: 0.32
Mechanical Q Value -Qms: 4.4
Total Speaker Q Value -Qts: 0.30
Free Air Resonance -Fs: 30.6 Hz
Equivalent Compliance -Vas: 47.6 liters
One-Way, Linear Excursion -Xmax: 22 mm
Efficiency -SPL 1W/1m: 88.1 dB SPL
Effective Piston Area -Sd: 480 cm^2
DC Resistance -Re: 1.9 ohm
Nominal Impedance -Znom: Dual 2/4 ohm
Thermal Power Handling -Pe: 1000 W
Memphis Pr1kd, it's an old model all I know is the output, few scratches is all looks pretty good I think it's around 10 years old-100+shipping
400@4ohms, 600@2ohms and 1000@1 ohm
CDT HD 4 mids BNIB, planned on doing a 3 way front never got around to it I threw out the CDT box but they have never been used-90 shipped
•ceramic 14.6 oz woofer magnet
•gold plated terminals
•butyl rubber surrounds
•flat spider-allows a consistently linear cone excursion
•20mm high temp aluminum voice coil former
•mounting Depth: 2.10"
•90 watts power handling- at 100 Hz High Pass
•frequency response 65Hz-7kHz flat(6.5-octave response)
•Sensitivity 92.00 dB (2.83V)
•4 Ohm
•recommended high pass x-over point 90Hz
and some older Kenwood 5x7 coaxials like new condition, no scratches or defects-20+shipping
Electrical Q Value -Qes: 0.32
Mechanical Q Value -Qms: 4.4
Total Speaker Q Value -Qts: 0.30
Free Air Resonance -Fs: 30.6 Hz
Equivalent Compliance -Vas: 47.6 liters
One-Way, Linear Excursion -Xmax: 22 mm
Efficiency -SPL 1W/1m: 88.1 dB SPL
Effective Piston Area -Sd: 480 cm^2
DC Resistance -Re: 1.9 ohm
Nominal Impedance -Znom: Dual 2/4 ohm
Thermal Power Handling -Pe: 1000 W
Memphis Pr1kd, it's an old model all I know is the output, few scratches is all looks pretty good I think it's around 10 years old-100+shipping
400@4ohms, 600@2ohms and 1000@1 ohm
CDT HD 4 mids BNIB, planned on doing a 3 way front never got around to it I threw out the CDT box but they have never been used-90 shipped
•ceramic 14.6 oz woofer magnet
•gold plated terminals
•butyl rubber surrounds
•flat spider-allows a consistently linear cone excursion
•20mm high temp aluminum voice coil former
•mounting Depth: 2.10"
•90 watts power handling- at 100 Hz High Pass
•frequency response 65Hz-7kHz flat(6.5-octave response)
•Sensitivity 92.00 dB (2.83V)
•4 Ohm
•recommended high pass x-over point 90Hz
and some older Kenwood 5x7 coaxials like new condition, no scratches or defects-20+shipping
Last edited by a moderator:
