Power Acoustik TS960 - About 15 months old - 75 shipped
RMS Power (4 ohms): 100 watts x 4 chan.
RMS Power (2 ohms): 125 watts x 4 chan.
Bridged RMS Power(4 ohms): 250 watts x 2 chan.
Peak Power Output: 960 watts
Min. Impedance Unbridged: 2 ohms
Min. Impedance Bridged: 4 ohms
THD @ Rated RMS Power:
Speaker Level Inputs: Yes
Amp Preamp Outputs: Yes - 1 Pair
Built-in Crossover: Yes
High-Pass Crossover: 40Hz - 250Hz
Low-Pass Crossover: 40Hz - 250Hz
Signal-to-Noise Ratio: >98 dB
Channel Separation: >55 dB
Bass Boost: 0 - 18 dB
http://i139.photobucket.com/albums/q313/mysilver02alty/TS960.jpg
One pair of Eminence Alpha 6c loud speakers, and i do mean loud. Until you hear it, you dont understand. Used for 3 weeks- 55 shipped
Recommended for professional audio midrange applications in a sealed cabinet, or as a mid-bass in a vented satellite enclosure. The Alpha-6C boasts a 4-ohm impedance, increased body weight, and stiffer, more aggressive water proofing treatment on the cone making it ideal for car audio use. Specifications: *Power handling: 100 watts RMS *VCdia: 1.5" *Le: 0.28 mH *Impedance: 4 ohms *Re: 3.2 ohms *Frequency range: 107-6,000 Hz *Magnet weight: 20 oz. *Fs: 107 Hz *SPL: 93.6 dB 1W/1m *Vas: 0.2 cu. ft. *Qms: 6.12 *Qes: 0.49 *Qts: 0.45 *Dimensions: Overall Diameter: 6.59", Mounting Diameter: 5.69", Mounting Depth: 2.8".
http://www.bltsound.com/index.php?crn=16&rn=482&action=show_detail
6x9 to 6.5 converters - used for about a week- 20 shipped
If yo have 6x9 holes in your rear deck, these make it so you can snugly fit a 6.5.
US Amps ax4300 - one channel not working 130.00 or best offer, keep in mind that ebay is already bid up to 45 plus 30 shipping before offering 50 shipped //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
The amp has 3 working channels out of 4. I do not know how to fix amplifiers but maybe this is an easy fix for one of you guys. Other than that, its a brand new amp and the other 3 channels are working fine.
One other issue with it is that one of the mounting holes broke off. Im sure its an easy fix for one of you guys. Probably just superglue will fix this. It is easy to see in the pics .
Its basically brand new with like 2 or maybe 3 hours of play time on it at most. Not a scratch on it, its on
ebay right now with a big, but if i get a good offer, i can end auction early. Act soon.
75W × 4 @ 4 Ohms
90W × 4 @ 2 Ohms
180W × 2 @ 4 Ohms Bridged
With full xover, RBG, F/R inputs
http://i139.photobucket.com/albums/q313/mysilver02alty/100_0215.jpg
http://i139.photobucket.com/albums/q313/mysilver02alty/100_0216.jpg
http://i139.photobucket.com/albums/q313/mysilver02alty/100_0218.jpg
Adire Audio - Ampman Revolution 1500.1 - SOLD
//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
