I think im going to pick up the crossfire 705 so ill have no need for this.
AMP GUTS
5 channel amplifier
Output Power at 12V (20Hz ∼ 20kHz):
4 x 30W + 1 x 150W @ 4 ohms (0.08% THD)
4 x 40W @ 2 ohms (0.3% THD)
2 x 80W @ 4 ohms bridged (0.3% THD)
Output Power at 14.4V (20Hz ∼ 20kHz):
4 x 50W + 1 x 200W @ 4 ohms (0.08% THD)
4 x 60W @ 2 ohms (0.3% THD)
2 x 120W @ 4 ohms bridged (0.3% THD)
Freq. Response: 10Hz ∼ 50kHz (+0, -1dB)
S/N Ratio: 100dBA (at rated power)
Fuse: 2 x 30A
Dimensions: 16.4" x 9.7" x 2.7" (42cm x 24.7cm x 6.8cm)
Asking $120shipped.
It has been sitting for a few months so ill test it before i ship out just to make sure.
I give it like a 6/10 cosmetically. It has some scratches, missing one of the screws that holds the chrome flap down(using one is just fine), and there is no end cap. When i used it, it worked flawlessly.
Pictures are coming very soon.
AMP GUTS
5 channel amplifier
Output Power at 12V (20Hz ∼ 20kHz):
4 x 30W + 1 x 150W @ 4 ohms (0.08% THD)
4 x 40W @ 2 ohms (0.3% THD)
2 x 80W @ 4 ohms bridged (0.3% THD)
Output Power at 14.4V (20Hz ∼ 20kHz):
4 x 50W + 1 x 200W @ 4 ohms (0.08% THD)
4 x 60W @ 2 ohms (0.3% THD)
2 x 120W @ 4 ohms bridged (0.3% THD)
Freq. Response: 10Hz ∼ 50kHz (+0, -1dB)
S/N Ratio: 100dBA (at rated power)
Fuse: 2 x 30A
Dimensions: 16.4" x 9.7" x 2.7" (42cm x 24.7cm x 6.8cm)
Asking $120shipped.
It has been sitting for a few months so ill test it before i ship out just to make sure.
I give it like a 6/10 cosmetically. It has some scratches, missing one of the screws that holds the chrome flap down(using one is just fine), and there is no end cap. When i used it, it worked flawlessly.
Pictures are coming very soon.
