Alpine CDA-9807 and MA Audio MPE-100 Parametric 1/2 din EQ
With these units I will include a very short RCA cable to couple them together, and the plastic mounting flange (Mounting kit) that I already modified to fit the 1/2 DIN EQ right below the deck. Fits 95-2001 explorer's/mountaineers possibly sports/tracs through current models. So just pick up the harness for your truck and plug and play with excellent sound! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Both units come with wiring harnesses, and both are complete, faceplates and such. The alpine has a remote control as well. No original boxes, but both units come with their respective manuals.
I'd like $200 Shipped depending on where you live OBO
Features.
MA Audio MPE-100
-Volume control with up to 7 volts RMS of RCA output
-Four band parametric equalizer with 18db +/-
-Specific bandwidth for each band
-Low noise BI-FET op-amp design yields minimum distortion
-On board 30V bi-polar switching power supply
-Subwoofer outputs and level controls
-Subwoofer EQ frequencies adjustable (50hz-260hz)
-Dual inputs with selector
-Front, Rear, Sub 7v outputs
-Gold plated connectors
-20db headroom eliminates signal overload
Alpine CDA-9807
-Detachable face Plays MP3 and Windows Media (WMA) files Displays MP3 text
-MaxTune tuner 12 FM/6 AM presets
-Bass Engine
-Media Xpander
-XM Satellite Radio controls (XM Radio subscription, tuner, antenna required to receive the satellite radio signal.)
-CD changer controls for Alpine Ai-NET changers only
-Optional auxiliary input
-MOSFET internal amp 23 watts RMS/50 peak x 4 channels
-4-volt front and rear preamp outputs, 4-volt subwoofer preamp outputs
-Wireless remote
-Clock
-CD frequency response 5-20,000 Hz
-CD signal-to-noise ratio 105 dB
-FM sensitivity 9.3 dBf
So total with both units linked you have 1 RCA input, 1 AI-net input, 7v Front, Rear and Sub outputs, 4v Front Rear and Sub outputs. That's flexibility! //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif
With these units I will include a very short RCA cable to couple them together, and the plastic mounting flange (Mounting kit) that I already modified to fit the 1/2 DIN EQ right below the deck. Fits 95-2001 explorer's/mountaineers possibly sports/tracs through current models. So just pick up the harness for your truck and plug and play with excellent sound! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Both units come with wiring harnesses, and both are complete, faceplates and such. The alpine has a remote control as well. No original boxes, but both units come with their respective manuals.
I'd like $200 Shipped depending on where you live OBO
Features.
MA Audio MPE-100
-Volume control with up to 7 volts RMS of RCA output
-Four band parametric equalizer with 18db +/-
-Specific bandwidth for each band
-Low noise BI-FET op-amp design yields minimum distortion
-On board 30V bi-polar switching power supply
-Subwoofer outputs and level controls
-Subwoofer EQ frequencies adjustable (50hz-260hz)
-Dual inputs with selector
-Front, Rear, Sub 7v outputs
-Gold plated connectors
-20db headroom eliminates signal overload
Alpine CDA-9807
-Detachable face Plays MP3 and Windows Media (WMA) files Displays MP3 text
-MaxTune tuner 12 FM/6 AM presets
-Bass Engine
-Media Xpander
-XM Satellite Radio controls (XM Radio subscription, tuner, antenna required to receive the satellite radio signal.)
-CD changer controls for Alpine Ai-NET changers only
-Optional auxiliary input
-MOSFET internal amp 23 watts RMS/50 peak x 4 channels
-4-volt front and rear preamp outputs, 4-volt subwoofer preamp outputs
-Wireless remote
-Clock
-CD frequency response 5-20,000 Hz
-CD signal-to-noise ratio 105 dB
-FM sensitivity 9.3 dBf
So total with both units linked you have 1 RCA input, 1 AI-net input, 7v Front, Rear and Sub outputs, 4v Front Rear and Sub outputs. That's flexibility! //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif
