If you have followed my project you know this amps have been used 2-3 days, they're in perfect conditions no scratches, I have only tested 3 of them for my 3 way system. bought them on crutchfield for $59.99 + Shipping after a $120 discount each one.
For my experience in car audio this is a great powerfull amplifier, thin for tight places and comes with remote gain control, high/low pass crossover. Makes my Daytons RS180's produce a very tight midbass.
Only reason I'm selling them is because I bought 2 JL Audio amps to have more space in my trunk. Plus I need to re-fill my wallet after spending $ on the JL amps. NO SCRATCHES on this amps
All of them comes with box instructions and remote gain control.
$50 + Shipping each.
All 5 for $275 shipped.
PAYPAL accepted.
Here are the specs:
RMS Power Output (Watts x Channels) 75 x 2
Peak Power Output (Watts x Channels) 150 x 2
Power at 2 Ohms (Watts x Channels) 120 x 2
Bridged Power (Watts x Channels) 200 x 1
Minimum Impedance Bridged 4
Minimum Impedance Unbridged 2
Frequency Response at Rated RMS Power 20-20k Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 97 dB
Input Voltage 14.4v
Features
Amplifier Class AB
Low-Pass Crossover Frequency 50-250 Hz
Low-Pass Slope (dB/octave) 12 dB/oct
High-Pass Crossover Frequency 50-250 Hz
High-Pass Slope (dB/octave) 12 dB/oct
Bass Boost 0-12dB
Bass Boost Frequency 45Hz
Fan Cooled No
Fuse Rating 40 x 1
Speaker Level Inputs No
Preamp Outputs 1 pair
LED Power Indicator Yes
Width (inches) 9-7/8
Height (inches) 1-11/16
Depth (inches) 13-7/8
Internal components much better than some Sony, Pioneer, MTX, US Acoustics amplifiers
For my experience in car audio this is a great powerfull amplifier, thin for tight places and comes with remote gain control, high/low pass crossover. Makes my Daytons RS180's produce a very tight midbass.
Only reason I'm selling them is because I bought 2 JL Audio amps to have more space in my trunk. Plus I need to re-fill my wallet after spending $ on the JL amps. NO SCRATCHES on this amps
All of them comes with box instructions and remote gain control.
$50 + Shipping each.
All 5 for $275 shipped.
PAYPAL accepted.
Here are the specs:
RMS Power Output (Watts x Channels) 75 x 2
Peak Power Output (Watts x Channels) 150 x 2
Power at 2 Ohms (Watts x Channels) 120 x 2
Bridged Power (Watts x Channels) 200 x 1
Minimum Impedance Bridged 4
Minimum Impedance Unbridged 2
Frequency Response at Rated RMS Power 20-20k Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 97 dB
Input Voltage 14.4v
Features
Amplifier Class AB
Low-Pass Crossover Frequency 50-250 Hz
Low-Pass Slope (dB/octave) 12 dB/oct
High-Pass Crossover Frequency 50-250 Hz
High-Pass Slope (dB/octave) 12 dB/oct
Bass Boost 0-12dB
Bass Boost Frequency 45Hz
Fan Cooled No
Fuse Rating 40 x 1
Speaker Level Inputs No
Preamp Outputs 1 pair
LED Power Indicator Yes
Width (inches) 9-7/8
Height (inches) 1-11/16
Depth (inches) 13-7/8
Internal components much better than some Sony, Pioneer, MTX, US Acoustics amplifiers