Up for sale today are my 2 12" Memphis Audio M-Class DVC 4 ohm subs. I bought these about 2 years ago, april of 04 IIRC. The subs were used in a sealed box their entire life, never clipped, never smoked at all... Solid woofers that can handle more than memphis rates them at. They are more geared toward SQ/SQL IMHO. They dont have super high amounts of play time on them because the cars i had them in kept leaving me stranded, and after hurricane katrina i didnt drive for well over 4 months. They do have some minor blemishes to the cones, but nothing that affects performance, no holes or anything, just a little discoloration.
Looking for $150 for these babies.
Also up for sale, since I never got any serisous buyers last time, is my prized Alpine MRV-1507 2/1 channel A/B amplifier. Ive had this as long as my memphis subs, and has been taken care of pretty well. The dark grey heatsinks were missing some paint, so they have been repainted. This amp puts out some SERIOUS power...You can't find one on eBay for less than $300 these days. Here's the specs from the user manual. They are quite conservative
--Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20
kHz)
MRV-1507
Per channel into 4 ohms ......................... 225W, 0.08% THD
Per channel into 2 ohms .......................... 450W, 0.3% THD
Bridged into 4 ohms ................................ 900W, 0.3% THD
--Max. Power (at 14.4V)
MRV-1507
Per channel into 4 ohms ............................................ 450W
Bridged into 4 ohms ................................................ 1500W
--Frequency Response ................... 10 Hz to 50 kHz (+0, –1 dB)
--Signal-to-Noise Ratio
(referenced to rated power) ........................................ 105 dBA
--Slew factor ........................................................ Greater than 5
--Damping factor
MRV-1507/MRV-757 ................................ Greater than 500
--Power Requirement .................. 11 – 16V DC Negative Ground
I wonder how well it would do on 16v //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif
Anyways, im looking to get $200 for the amp
Heres a pic
Ill try to get more later if i can find my camera.
Ill also let them go together as a package deal for $300.
Looking for $150 for these babies.
Also up for sale, since I never got any serisous buyers last time, is my prized Alpine MRV-1507 2/1 channel A/B amplifier. Ive had this as long as my memphis subs, and has been taken care of pretty well. The dark grey heatsinks were missing some paint, so they have been repainted. This amp puts out some SERIOUS power...You can't find one on eBay for less than $300 these days. Here's the specs from the user manual. They are quite conservative
--Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20
kHz)
MRV-1507
Per channel into 4 ohms ......................... 225W, 0.08% THD
Per channel into 2 ohms .......................... 450W, 0.3% THD
Bridged into 4 ohms ................................ 900W, 0.3% THD
--Max. Power (at 14.4V)
MRV-1507
Per channel into 4 ohms ............................................ 450W
Bridged into 4 ohms ................................................ 1500W
--Frequency Response ................... 10 Hz to 50 kHz (+0, –1 dB)
--Signal-to-Noise Ratio
(referenced to rated power) ........................................ 105 dBA
--Slew factor ........................................................ Greater than 5
--Damping factor
MRV-1507/MRV-757 ................................ Greater than 500
--Power Requirement .................. 11 – 16V DC Negative Ground
I wonder how well it would do on 16v //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif
Anyways, im looking to get $200 for the amp
Heres a pic
Ill try to get more later if i can find my camera.
Ill also let them go together as a package deal for $300.
