1. Product:
10" TC Sounds LMS-4000
2. Specs:
• 3" diameter aluminum wire linear voice coil using LMS Technology (Pat. Pend.)
• Quadruple stacked 3/4" tall, 7.5" wide ferrite magnets
• 300oz motor structure
• xmax of 30mm (one way completely linear Bl )
• Single (10"/8.5") poly-cotton spider with intergraded woven leads (15/12,10)
• Extra clearance under the suspension for dynamic high excursions
• Detachable cast aluminum basket with high gloss power coating
• Single 3Ω aluminum voice coil with four layers
• 800 watts sustained (2500 dynamic)
• High quality thermal flexible epoxies to ensure longevity
• Rigid lightweight brushed aluminum cone
• Vented flared pole piece
• 3" Long copper shorting ring for low inductance
• Rubber half roll surround allows for linear travel
• Dressed in a rubber magnet boot and gasket
• Hand built in our San Diego, CA factory
3. Description/Condition:
pretty much mint. i used it for just a few min. the only reason i'm starting a new thread is due to a lot of confusion over the last one with the 10 and 12 in the same pic. these are all fresh pic's with only the 10 taken just a few min's ago.
4. Price: :
300 shipped.
the ONLY trades i'm considering is a D2 12" omega, or an amp to power a D2 omega.
5. Pictures:
yes, it does come with the screws.
10" TC Sounds LMS-4000
2. Specs:
• 3" diameter aluminum wire linear voice coil using LMS Technology (Pat. Pend.)
• Quadruple stacked 3/4" tall, 7.5" wide ferrite magnets
• 300oz motor structure
• xmax of 30mm (one way completely linear Bl )
• Single (10"/8.5") poly-cotton spider with intergraded woven leads (15/12,10)
• Extra clearance under the suspension for dynamic high excursions
• Detachable cast aluminum basket with high gloss power coating
• Single 3Ω aluminum voice coil with four layers
• 800 watts sustained (2500 dynamic)
• High quality thermal flexible epoxies to ensure longevity
• Rigid lightweight brushed aluminum cone
• Vented flared pole piece
• 3" Long copper shorting ring for low inductance
• Rubber half roll surround allows for linear travel
• Dressed in a rubber magnet boot and gasket
• Hand built in our San Diego, CA factory
3. Description/Condition:
pretty much mint. i used it for just a few min. the only reason i'm starting a new thread is due to a lot of confusion over the last one with the 10 and 12 in the same pic. these are all fresh pic's with only the 10 taken just a few min's ago.
4. Price: :
300 shipped.
the ONLY trades i'm considering is a D2 12" omega, or an amp to power a D2 omega.
5. Pictures:
yes, it does come with the screws.
