Foam or plastic baffles?

[HERETIC 10+ year member]

when you build or buy a sealed baffle you can always drill a hole in the baffle and put a little cotton in the hole. that will let it breath a little and make the speaker think it's in a bigger encloseur

 

[squeak9798 5,000+ posts]

Or you could just cut the bottom off, so it KNOWS it's in a "large enclosure" //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[HERETIC 10+ year member]

Or you could just cut the bottom off, so it KNOWS it's in a "large enclosure" //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

thats funny. i always wondered what a 6.5 or 8" mid would sound like ina sealed baffle in the doors. to me with roller windows that would seem hard to do

 

[squeak9798 5,000+ posts]

thats funny. i always wondered what a 6.5 or 8" mid would sound like ina sealed baffle in the doors.

Depends on the speaker. It could very likely cause non-favorable outcomes. Much the same as putting a sub in WAY too small of an enclosure.