Fml

[murph 10+ year member]

Spent the day installing and after thousands of issues it comes down to one of my subs having a wiring issue inside the box. I have no help atm and the box weighs too much to take out by myself. FML

Click to read more...

 

[GAMEOVERCCA 10+ year member]

//content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif

 

[09civic 5,000+ posts]

If you don't take the time and install properly, that will happen again and again and again.

 

[Falcons 5,000+ posts]

Sorry to here that murph

 

[Kangaroux 5,000+ posts]

If you don't take the time and install properly, that will happen again and again and again.

 

[Buck 5,000+ posts]

Don't do anything stupid to try to get it fixed quickly, been there, messed stuff up...

 

[Kangaroux 5,000+ posts]

Don't do anything stupid to try to get it fixed quickly, been there, messed stuff up...

This x10000. I've done this way too many times

 

[Buck 5,000+ posts]

Patience, young grasshopper //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[Ninesvnsicks 10+ year member]

Can you take the subs out with it in the car instead of taking the whole box out?

 

[murph 10+ year member]

Can you take the subs out with it in the car instead of taking the whole box out?

Nope I could try but I will take it safe and put in the extra work of taking it out.

 

[RangerDangerV2 5,000+ posts]

so wait???

 

[murph 10+ year member]

so wait???

That is what I am doing lol, I was just frustrated at the time. The moment of the day had to be though when my electrical tape was stuck in my engine bay.

 

[Skinkutter 10+ year member]

I feel ya man! Thursday a customer came in for a simple swap out on a pair of 15's. Which was already a project. I had to have the installer remove all the panels to get the seat out to get the box out. No problem there, but because the vc config was different I had to build a new harness. Okay no problem there. I somehow screwed up and made the harness hella-short...PROBLEM! Holding a 50 pound sub while trying to hit push terms on opposite sides of the woofer AAAAARRGGHH! Okay got it! Whew! Uh OH the rim diameter is about 1/16 bigger than the old subs! Box is 100% custom and subs are flush mount! About an hour later I finally dremelled my way to a good fit! I made 200 dollars all day!! FML!! I feel ya!