Fix??

[audiobaun 5,000+ posts]

Its 1in mdf, It feels like 250 with putting in one handed with one jacked up..lol..slots are 2.50x9.50x13 deep..for 2.0 cuft chamber??Is that not big enough??

 

[audiobaun 5,000+ posts]

1000 rms,2000pk dvc 2ohm for 2.0 cuft per chamber in 1in mdf slot ported @ 2.50x9.50x13in deep ???

 

[audiobaun 5,000+ posts]

Are those tiny things ports? I hope not.

Also a side note, that does not weight any where close to 250lbs..won't even break the 100lb marker.

My guess, about 70-85lbs give or take 5lbs.

Deminisions on my ports not correct??For my subs?? Its 1in MDF ports are 2.50x9.50x13 deep,for 2.0cuft???Thanks

 

[audiobaun 5,000+ posts]

Got them sealed off:santa:Moving on towards compleation

 

[Falcons 5,000+ posts]

Got them sealed off:santa:Moving on towards compleation

pics or GTFO

 

[pro-rabbit 5,000+ posts]

Its 1in mdf, It feels like 250 with putting in one handed with one jacked up..lol..slots are 2.50x9.50x13 deep..for 2.0 cuft chamber??Is that not big enough??

That will work(ish), but it is a pretty small amount of port area.

Was there a reason for doing separate chambers?

 

[audiobaun 5,000+ posts]

That will work(ish), but it is a pretty small amount of port area.
Was there a reason for doing separate chambers?

Ive just never liked subs sharing the same space,and if one sub goes, you still have the option to run a substage without having to seal up a hole ,or wait on another sub,just to have some bass in the vehicle..Running a pair in a single vehicle,ive always ran separate chambers,as If one blows within the pair running @2ohm, I am able to still run the single at 4ohms..gives me more options if one or two go, or even three.

 

[audiobaun 5,000+ posts]

Thanks to An individual Grayson that competes for MECA over the weekend, I have all 4 subs going, and am very pleased,and sounds insane/been what ive been looking for for the last few years,that i once had,and not looking to go back anytime soon..lol.Im trying to get the best of both worlds,as far as SPL,and SQ,and need to work on a few things to get there,and getting close i feel.Next step is to clean up my wiring, and get my amp board made,which will house 2-Autotek BTS 7150s on the 4 subs@2ohms, 1-Autotek BTS 7204,on a set of CDT CL 62/450 6,5 components, and a pair of 1in Infinity Kappa tweets,and an Autotek Mean Machine 99 on a pair of CDT HD-6 100 Briaxel,with a set of Polk MM 5.25 Woofers,and a set of Infinity 7/8 Infinity Ref tweeters,a Kicker KQ9 Preamp eq,and an Eclipse CD3000 HU(soon to change to the CD 8455)..Seems to all sound great together so far..I just need to do some placement from stock locations to get the imaging needed to get everything aligned to placement..i am very happy so far:santa:I Thank you Grayson,it was a pleasure to meet everyone at the MECA meet over the weekend,and hear different fantastic sounding systems,and some very knowledgeable good people as well

 

[TheUnderFighter 10+ year member]

1000 rms,2000pk dvc 2ohm for 2.0 cuft per chamber in 1in mdf slot ported @ 2.50x9.50x13in deep ???

SO. MUCH. CHROME. hahaha. Why would you even list the peak ratings man?

 

[audiobaun 5,000+ posts]

SO. MUCH. CHROME. hahaha. Why would you even list the peak ratings man?

I have no shame of the performance of my subs thus far..AW1008t..Being Discontinued USA/California Made Audiobahn subs/not the Jap made,It took me Almost 2yrs to find a set to have a total of four once again,due to Damaged theft recovery of my vehicle,of two subs, and 1-USA US Asoustics 4080/1-2050h,and 2-2150s out of four.Some of the most reliable/performed subs i have ever owned to date..cleaning up the cab area is under way,just over a year now after the engine,and transmission and suspension replacements/rebuilds..Hate if you want..Those Puppies BAAANG!! Bro,and hard to find..No need to bash others..quite disrespectful at that..//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[audiobaun 5,000+ posts]

SO. MUCH. CHROME. hahaha. Why would you even list the peak ratings man?

I have no shame of the performance of my subs thus far..AW1008t..Being Discontinued USA/California Made Audiobahn subs/not the Jap made,It took me Almost 2yrs to find a set to have a total of four once again,due to Damaged theft recovery of my vehicle,of two subs, and 1-USA US Asoustics 4080/1-2050h,and 2-2150s out of four.Some of the most reliable/performed subs i have ever owned to date..cleaning up the cab area is under way,just over a year now after the engine,and transmission and suspension replacements/rebuilds..Hate if you want..Those Puppies BAAANG!! Bro,and hard to find..No need to bash others..quite disrespectful at that..//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[madcad95 10+ year member]

Just make sure to ground everything to the seat bolt //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[disturbed471985 5,000+ posts]

Looks nice man...

 

[audiobaun 5,000+ posts]

Looks nice man...

Thank you sir..I will follow up on pics of the amp board layout soon,//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

---------- Post added at 05:01 AM ---------- Previous post was at 05:00 AM ----------

 

Just make sure to ground everything to the seat bolt //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

And I have:santa:Goes directly to the frame

 

[TheUnderFighter 10+ year member]

I have no shame of the performance of my subs thus far..AW1008t..Being Discontinued USA/California Made Audiobahn subs/not the Jap made,It took me Almost 2yrs to find a set to have a total of four once again,due to Damaged theft recovery of my vehicle,of two subs, and 1-USA US Asoustics 4080/1-2050h,and 2-2150s out of four.Some of the most reliable/performed subs i have ever owned to date..cleaning up the cab area is under way,just over a year now after the engine,and transmission and suspension replacements/rebuilds..Hate if you want..Those Puppies BAAANG!! Bro,and hard to find..No need to bash others..quite disrespectful at that..//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

I wasn't hating on anything man, I'm sorry you're so defensive and interpreted it like that though o.0

I commented on the usual excess amount of chrome. And then was curious why you bothered listing the peak power ratings? Clearly my sense of humor is lost over the ethernet cables.