Finished my first ported enclosure

[angrytrucker78 10+ year member]

Well here it is. 2.8 cu ft gross, 2 4"x26" ports tuned to 28hz.

iDMAX 12D4 Powered by Boston Acoustics GT28. This thing hits LOW.

Click to read more...

 

[Lurius 10+ year member]

Carpet that hoe! //content.invisioncic.com/y282845/emoticons/2thumbs.gif.fdc3ba010dbb42b61704534b46d02fe4.gif

-Lurius

 

[angrytrucker78 10+ year member]

I went today and ordered some vinyl that matches the hatch cover. I should have it in a few days.

 

[revrider1 5,000+ posts]

Nice...

I likes the amp...

 

[Beat_Dominator 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif very nice box. How many watts does that GT28 feed the Max?

 

[revrider1 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif very nice box. How many watts does that GT28 feed the Max?

x2

 

[jj4475 10+ year member]

nice

 

[traksta15 10+ year member]

sweet.......

 

[angrytrucker78 10+ year member]

//content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif very nice box. How many watts does that GT28 feed the Max?

1100 2 ohms mono@12.6 volt. I measured it yesterday it idles at 13.7 and when the bass hits real good it drops to around 11.8-12.1. I called Ohio Generator today and Gus said he has a direct bolt-on for my car 160-180 amp. And I also have the smaller Kinetik on the way to run in place of a cap. So I should be in pretty good shape once all of that is taken care of. I also wanna replace my fronts, but with what I'm not sure.

 

[PV Audio 5,000+ posts]

My dad would shoot you for putting a setup into a Z //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Even though yours isn't turbo.

 

[Beat_Dominator 5,000+ posts]

1100 2 ohms mono@12.6 volt. I measured it yesterday it idles at 13.7 and when the bass hits real good it drops to around 11.8-12.1. I called Ohio Generator today and Gus said he has a direct bolt-on for my car 160-180 amp. And I also have the smaller Kinetik on the way to run in place of a cap. So I should be in pretty good shape once all of that is taken care of. I also wanna replace my fronts, but with what I'm not sure.

That's a happy 'Max //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[angrytrucker78 10+ year member]

My dad would shoot you for putting a setup into a Z //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Even though yours isn't turbo.

Watch your mouth. It most definately is a Twin Turbo. It's debadged and incognito.

 

[PV Audio 5,000+ posts]

Watch your mouth. It most definately is a Twin Turbo. It's debadged and incognito.

Then he'd definitely shoot you //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[PV Audio 5,000+ posts]

What you got in there? I see some stillen hoses, that's it. He's had two, a white one like yours that put out about 420 bhp, but now he's got a stock black one with just a short shifter.

And it can't be incognito with the front intercooler vents //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[angrytrucker78 10+ year member]

What you got in there? I see some stillen hoses, that's it. He's had two, a white one like yours that put out about 420 bhp, but now he's got a stock black one with just a short shifter.
And it can't be incognito with the front intercooler vents //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Well, most people don't know intercooler vents from their elbows. Yes, I have stillen hoses, HKS intercoolers, JWT pop charge and software, Turbo Genie exhaust, SZ subframe spacers, Greddy Turbo timer, UR l/w pulley, race pipes. I have a set of SZ downpipes sitting in the garage waiting for the clutch to go so I can swap those in while the ****** is out anyway.

Also, non of this stereo is permanately mounted, so it can come out at a moments notice. The butt dyno shows no loss from the added weight.