Sold F/S Visionik 900HC 3KW @ 1ohm Monster Class A/B Amp 28 inches long! /cheap!

ampjunkielikeme
10+ year member

CarAudio.com Veteran
Rating: 100%
7 0 0
235.00 firm shipped for each amp to the cont usa....

470.00 shipped for both amps

that covers paypal fees, shipping cost , bubble wrap, box, and insurance...

i have 2 of these amps get 5000+ watts for cheap

this is a visionik 900hc. a very rare and huge class a/b amplifier...i replaced the ugly top with a brand new plexi one with vent holes for the fan....it makes the amp look just sick..IMHO //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif it is begging for a white led mounted under each of the fans...lol...maybe not...

im not sure if this amp was made in the usa or overseas?? probably korea?? , but the layout reminds me of a old school US AMPS 2000X ..

the amp has 20 power supply transistors, and 32 outputs...//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

from a scale from 1 to 10...i would give the amp a 8.5 for condition...it has a few scuffs , but the plexi is slick as glass...

Its a MONSTER ! the amp is 28 inches from end to end!

functionality . it is a 10 out of a 10...it works 100%

f.y.i. - this amp has had the power supply rebuilt by me with new power supply transistors, new gate drivers, new gate resistors, new 949tl pwm ic chip.2 output drivers...

i load tested for a couple hours today hooked up to my 12's. they really, really, begged for mercy.. , it is ready to pound your subs ...i would not sell it if it didnt work right...

i think the amp will put out 2000+ watts....its built with very high voltage/amperage parts that are very expensive..., as long as you have a good electrical to back this monster , this amp will do some serious damage to your car, your subs and your hearing..

you can run this amp on your mids and tweets if you really wanted (has built in high pass crossover)...lol...imagine 2000+ clean watts going to 8 sets of components.. mind blowing....

specs:

2 x 750W Rms @ 4 Ohm Stereo

2 x 1000W Rms @ 2 Ohm Stereo

2 x 1500W Rms @ 1 Ohm Stereo

2 x 2000W Rms @ ½ Ohm Stereo

1 x 3200W Rms @ 1 Ohm Bridged

Fuse: 5 x 40A

http://ampguts.realmofexcursion.com/Visonik_V900HC/

it reminds of this ma amp to...this amp does the rated power is says it does also:eek:...

http://ampguts.realmofexcursion.com/MA_5082HX/

ppi572.jpg


ppi573.jpg


ppi574.jpg


ppi575.jpg


ppi576.jpg


ppi577.jpg


ppi578.jpg


This amplifier has been tested on the bench to operate normally but there is NO FURTHER WARRANTY IMPLIED OR EXPRESSED beyond that this amp will work 100% when you receive it....

 
Tis a great amp, and I'm pretty sure it's TL494, at least that's all the ones I used to design things with before I moved to the CD4046. @__@

Itt'd be EXPENSIVE to repair, which is why shops don't take these. I'd be hesitant to repair myself.

Bump for a great, expensive to repair amp. xD

 
Tis a great amp, and I'm pretty sure it's TL494, at least that's all the ones I used to design things with before I moved to the CD4046. @__@
Itt'd be EXPENSIVE to repair, which is why shops don't take these. I'd be hesitant to repair myself.

Bump for a great, expensive to repair amp. xD

yes sir, it has a tl949 running things. and the parts for it are very expensive....i agree 100% but to me it was worth it to bring it back to life...//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Um, it's a TL494. I just googled it and confirmed. xD Nothing new and fancy about it, been used for years. It is a great chip. It is the same as the KA7500. They are interchangeable. Okay, I'm done. xD

I'm having a problem coping with the cost of the mosfets in the VFL 400.1s and higher. $5 and $3 a piece, and there's about 50. @___@

You have a PM, sir.

 
i know how you feel about the prices for parts for these bigger amps....ive got a xxv sampson . the parts for the output stage cost like 5.00 each....and it has 32 of them..

i have more money in the amp than it is worth if you were to go and buy it new....lmao

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ampjunkielikeme

10+ year member
CarAudio.com Veteran
Thread starter
ampjunkielikeme
Joined
Location
nash, tn
Start date
Participants
Who Replied
Replies
49
Views
2,717
Last reply date
Last reply from
ampjunkielikeme
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top