this amp is in very good conditions, used, some scratshes, but sounds great and is powerfull as hell. this amp is usefull in so many configurations,
if the PM box is full feel free to e-mail me @ powernaudio at gmail.com
specs:
U S X 4 0 8 5
OUTPUT POWER
RMS, per channel @ 4 Ohms @ 12.9v input 85Wx4CH
RMS, per channel @ 2 Ohms @12.9v input 120Wx4CH
RMS, Bridged Mono @ 4 Ohms @ 12.9v input 240Wx2CH
INPUT SENSITIVITY, HI LEVEL .
INPUT SENSITIVITY, LOW LEVEL 110mV-8.8V
FREQUENCY RESPONSE 10Hz-30KHz, -0.5 dB
TOTAL HARMONIC DISTORTION LESS THAN 0.01%
S/N RATIO 101 dB
CHANNEL SEPARATION 81 dB
DAMPING FACTOR @20Hz 95
CROSSOVER RANGE
High Pass, 12 d/Octave 12Hz-200Hz
Low Pass, 24 dB/Octave 40Hz-200Hz
BASS BOOST, +18dB .
HIGH LEVEL INPUT .
REMOTE LEVEL PORT .
THERMOSTATICALLY CONTROLLED FAN .
PROTECTION
Reverse Polarity Yes
Thermal Yes
Short Circuit Yes
D.C Yes
FUSE RATING 35A
SIZE inches (mm)
Length 14.6(370)
Width 9.6(244)
Height 2.5(63.5)
here is the link:
http://www.usacoustics.com/newline/usx/usx4085/index.html
some pics:
if the PM box is full feel free to e-mail me @ powernaudio at gmail.com
specs:
U S X 4 0 8 5
OUTPUT POWER
RMS, per channel @ 4 Ohms @ 12.9v input 85Wx4CH
RMS, per channel @ 2 Ohms @12.9v input 120Wx4CH
RMS, Bridged Mono @ 4 Ohms @ 12.9v input 240Wx2CH
INPUT SENSITIVITY, HI LEVEL .
INPUT SENSITIVITY, LOW LEVEL 110mV-8.8V
FREQUENCY RESPONSE 10Hz-30KHz, -0.5 dB
TOTAL HARMONIC DISTORTION LESS THAN 0.01%
S/N RATIO 101 dB
CHANNEL SEPARATION 81 dB
DAMPING FACTOR @20Hz 95
CROSSOVER RANGE
High Pass, 12 d/Octave 12Hz-200Hz
Low Pass, 24 dB/Octave 40Hz-200Hz
BASS BOOST, +18dB .
HIGH LEVEL INPUT .
REMOTE LEVEL PORT .
THERMOSTATICALLY CONTROLLED FAN .
PROTECTION
Reverse Polarity Yes
Thermal Yes
Short Circuit Yes
D.C Yes
FUSE RATING 35A
SIZE inches (mm)
Length 14.6(370)
Width 9.6(244)
Height 2.5(63.5)
here is the link:
http://www.usacoustics.com/newline/usx/usx4085/index.html
some pics:
