Default f/s infinitys
1. Product: infinity 611a mono & infinity 7541a 4ch
2. Specs: infinity 611a
# mono subwoofer car amplifier
# 456 watts RMS x 1 at 4 ohms (657 watts RMS x 1 at 2 ohms)
# variable low-pass filter (32-320 Hz @ 12 dB/octave)
# Dynamic Bass Optimization (DBO) circuit (0-12 dB at 20-80 Hz)
# Class D design
# CEA-2006 compliant
# preamp inputs and outputs
# fuse rating: 30A x 2
infinity 7541a 4ch
# 4-channel car amplifier
# 111 watts RMS x 4 at 4 ohms (139 watts x 4 at 2 ohms)
# 278 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
# front and rear variable high-/low-pass filters (32-320 Hz, 12 dB/octave)
# variable bass boost (0-12 dB at 50 Hz)
# MOSFET power supplies
# CEA-2006 compliant
# Tri-way capable (Tri-Way crossover required)
# preamp- and speaker-level inputs
# preamp outputs
# 8-gauge power and ground leads with a 60A fuse recommended — wiring and hardware not included with amplifier
# fuse rating: 30A x 2
3. Description/Condition:
the 611a has a small scratch on the top verly noticeable
physical shape 9.5/10
performance 10/10
7541a
9.5/ has a chip on the mounting peg
10/10 performance
4. Price: : asking $295 w/s o.b.o for both or
611a $165+ shp obo
7541a $175+shp obo
5. Pictures:
amps pictures by s1r_lucky - Photobucket
[more pictures on here]
1. Product: infinity 611a mono & infinity 7541a 4ch
2. Specs: infinity 611a
# mono subwoofer car amplifier
# 456 watts RMS x 1 at 4 ohms (657 watts RMS x 1 at 2 ohms)
# variable low-pass filter (32-320 Hz @ 12 dB/octave)
# Dynamic Bass Optimization (DBO) circuit (0-12 dB at 20-80 Hz)
# Class D design
# CEA-2006 compliant
# preamp inputs and outputs
# fuse rating: 30A x 2
infinity 7541a 4ch
# 4-channel car amplifier
# 111 watts RMS x 4 at 4 ohms (139 watts x 4 at 2 ohms)
# 278 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
# front and rear variable high-/low-pass filters (32-320 Hz, 12 dB/octave)
# variable bass boost (0-12 dB at 50 Hz)
# MOSFET power supplies
# CEA-2006 compliant
# Tri-way capable (Tri-Way crossover required)
# preamp- and speaker-level inputs
# preamp outputs
# 8-gauge power and ground leads with a 60A fuse recommended — wiring and hardware not included with amplifier
# fuse rating: 30A x 2
3. Description/Condition:
the 611a has a small scratch on the top verly noticeable
physical shape 9.5/10
performance 10/10
7541a
9.5/ has a chip on the mounting peg
10/10 performance
4. Price: : asking $295 w/s o.b.o for both or
611a $165+ shp obo
7541a $175+shp obo
5. Pictures:
amps pictures by s1r_lucky - Photobucket
[more pictures on here]
