Eclipse SW7304

[ThunderCatz888 10+ year member]

Whats the consensus on this sub? I might be purchasing one, but I cant find anything on the internet about. Any help would be greatly appreciated.

 

---------- Post added at 07:44 PM ---------- Previous post was at 07:44 PM ----------

 

Also what are they worth now?

Click to read more...

 

[ciaonzo 5,000+ posts]

Great subs. Pretty much the same thing as the TC Sounds TC1000/Audiopulse EPIC. Geared toward accuracy with nice output.

 

[destined2race 10+ year member]

i cant remember what this model looks like... and google aint pullin up shiznit

 

[jeremiwvu]

maybe bad taste since I'm pretty sure you're referring to the one I'm selling/trading, but this is info I didn't write. also there is a forum on caraudio.com (http://www.caraudio.com/forums/subwoofers/466284-what-year-first-revision-eclipse-aluminum.html) about this sub vs the equivalent year prior/after, not sure which one I got but link below is the one I have... you can tell by the dual stacked magnet, and visually i noticed the slope of the back side of the magnet. I know you asked about the mounting depth... I'll measure it, don't think this has that info. my guess is approx 5-6" min mounting depth, but like i said I'll measure.

TC Sounds (TC-1000)

 

[ciaonzo 5,000+ posts]

Looks the same as the old school TC1000, just says Eclipse on the cone.

 

[destined2race 10+ year member]

Too much fail

 

[ciaonzo 5,000+ posts]

ah k i hit that screen but didnt see it say loading... Similiar to the 8812 series those are awesome subs. Great sq and can be pretty **** good on output. My buddy competed for a few years with a pair of the 15s in an old school RX7... was pretty **** loud.

No, lol.
Those are TC9 drivers with a 3" coil. The SW7304 is a TC2+ with a 2" coil.

 

[ciaonzo 5,000+ posts]

ah k i hit that screen but didnt see it say loading... Similiar to the 8812 series those are awesome subs. Great sq and can be pretty **** good on output. My buddy competed for a few years with a pair of the 15s in an old school RX7... was pretty **** loud.

No, lol.
Those are TC9 drivers with a 3" coil. The SW7304 is a TC2+ with a 2" coil.

 

[destined2race 10+ year member]

Sorry op ive been no help

 

[ciaonzo 5,000+ posts]

are you really Laughing out Loud?? from the link he posted is what i went off of... because that woofer is pretty **** similiar.

Yes, I was. Did you read anything in the other thread?
Have you read anything in this thread?

I've owned both drivers, and a few other TC's.

 

[destined2race 10+ year member]

Yes, I was. Did you read anything in the other thread?
Have you read anything in this thread?

I've owned both drivers, and a few other TC's.

so theres no similiarities at all on those to models eh?? There entirely different? Not what the pics show mr know it all... i didnt read it, i saw the pics and judging off that ive had the 8812's and other eclipse models they did appear "similiar".

 

[ciaonzo 5,000+ posts]

so theres no similiarities at all on those to models eh?? There entirely different? Not what the pics show mr know it all... i didnt read it, i saw the pics and judging off that ive had the 8812's and other eclipse models they did appear "similiar".

Tell you what...
Clicky on the linky again, go to post #4 and READ IT this time.

Notice that I'm the one in that thread, too?

 

[destined2race 10+ year member]

Tell you what...
Clicky on the linky again, go to post #4 and READ IT this time.

Notice that I'm the one in that thread, too?

alright youve missed my point multiple times now. OP hes right, theres no similiarities to the 8812 series so disregard my original post. From the PIC i saw they appeared similiar. I have had the 8812 series and have a 6210 (last aluminum cone model im aware of) and they are accurate, and ported can have pretty good output. Again, i cant speak i guess on your model but id say depending on condition around $100 is a great buy. I got the 6210 series off ebay new at $110 shipped and run it 3.0cu ported and it loves it.

 

[ciaonzo 5,000+ posts]

alright youve missed my point multiple times now. OP hes right, theres no similiarities to the 8812 series so disregard my original post. From the PIC i saw they appeared similiar. I have had the 8812 series and have a 6210 (last aluminum cone model im aware of) and they are accurate, and ported can have pretty good output. Again, i cant speak i guess on your model but id say depending on condition around $100 is a great buy. I got the 6210 series off ebay new at $110 shipped and run it 3.0cu ported and it loves it.

There's no reason I should have been trying to get your point. I gave the answer in post #2.
In post #3 you asked what it looked like because Google didn't produce any images. In post #5 I gave the answer again.

Should have Googled the TC1000 or the EPIC, then you would have had the correct image to comment on. Instead, you commented on the image in the other thread, which was of the 8800 series.

See why I was laughing? Not a big deal, bruh. Chalk it up...

 

[Boomsday 10+ year member]

There's no reason I should have been trying to get your point. I gave the answer in post #2.
In post #3 you asked what it looked like because Google didn't produce any images. In post #5 I gave the answer again.

Should have Googled the TC1000 or the EPIC, then you would have had the correct image to comment on. Instead, you commented on the image in the other thread, which was of the 8800 series.

See why I was laughing? Not a big deal, bruh. Chalk it up...

//content.invisioncic.com/y282845/emoticons/respekt.gif.b162d148236010609fe523122efe3729.gif