Dual SPG 555 Fiberglass box.

  • 1
    Participant count
  • Participant list

AlexB.

Junior Member
Looking to build a new box with a passive this time and wanted to build it out of fiberglass to give the front face a little bit more shape than wood can allow. Has anybody build a box out of fiberglass while using SGP's or know of a place to find a good DIY guide?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
5
837
Assuming the box is made of .75" MDF the 12"x20"x15" box is 1.5 Cu Feet. The 33"x19"x15" is 4.3 cubic feet, something is not right here. JL has...
3
831
Recoil 2500.1 $179 2500 x 1 @ 1 ohm. Make sure subs are the dual 4 ohm version. If you don't want that much power, get the Recoil red1200.1 for 1...
4
939
You should run all exact matching subwoofers in one singular enclosure and 1 amp or matching amps for the best listening experience for the space...
11
2K

About this thread

AlexB.

Junior Member
Thread starter
AlexB.
Joined
Location
Cincinnati OH
Start date
Participants
Who Replied
Replies
0
Views
776
Last reply date
Last reply from
AlexB.
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top