Distroblocks

[murph 10+ year member]

Hey I am new to the use of distroblocks and was wondering if you can put a ground and power wire in the same distro? For example I am looking at this. StreetWires FBXS024 AFS Fused Power Distribution Block

Click to read more...

 

[murph 10+ year member]

I assume you can't so if so would two separate fuse holders going from 1/0 to 4 gauge work?

 

[murph 10+ year member]

Anyone?

 

[cyn 10+ year member]

I wouldn't do that... I would use diff. distro boxes on that man... ebay has some nice ones for cheap...

that box is one solid on one side so that would be ehhhh no good... maybe if it had 2 zones on it.. but I still wouldnt' trust it as one of them what "if" things

 

[murph 10+ year member]

I wouldn't do that... I would use diff. distro boxes on that man... ebay has some nice ones for cheap...

Link to a single 1/0 to single 4 gauge.

 

[murph 10+ year member]

I wouldn't do that... I would use diff. distro boxes on that man... ebay has some nice ones for cheap...

Link to a single 1/0 to single 4 gauge.

 

[Rich B 5,000+ posts]

I assume you can't so if so would two separate fuse holders going from 1/0 to 4 gauge work?

Fuses are only necessary on the positive side, so you can just use a less expensive non fused distro for the ground.

 

[cyn 10+ year member]

do you need it to be fused or just for ground?

 

[murph 10+ year member]

Fuses are only necessary on the positive side, so you can just use a less expensive non fused distro for the ground.

Thanks I honestly have no idea what was going through my mind when I thought about this.

 

---------- Post added at 01:45 AM ---------- Previous post was at 01:45 AM ----------

 

do you need it to be fused or just for ground?

one fused one non fused.

 

[cyn 10+ year member]

POWER DISTRIBUTION BLOCK GOLD 0 2 4 GAUGE NEW psb15g | eBay

 

[murph 10+ year member]

Can I use this because I have an extra for the positive 1/0 to 4 gauge run. http://www.knukonceptz.com/productDetail.cfm?prodID=FH-20

 

[cyn 10+ year member]

Stinger SPD512 DB Blocks | eBay

 

[cyn 10+ year member]

Can I use this because I have an extra for the positive 1/0 to 4 gauge run. Knukonceptz product detail for IN-LINE WATERPROOF ANL FUSE HOLDER W/ FUSE

Yeah that would work... don't see why it wouldn't... for the ground i would just get one of the ones that is 1 in 2 out type ones...

 

[goingdef 10+ year member]

what are you trying to do splice a run of 0g into two amps with 4g or just reduce the 0g to 4g?

 

[murph 10+ year member]

what are you trying to do splice a run of 0g into two amps with 4g or just reduce the 0g to 4g?

reducing for one amp.