DD 3515 vs. PSI Platform 2 15"

[LosIsATool 5,000+ posts]

building anyway you need and using parts and topology that are built for low distortion are completely different. again i dare you to pt it on the klipple. SQ means next to no output im talking about 140DB and sounding great. I've yet to hear a DD subs sound like a reference SQ woofer..

At 140db huh. So you mean well past the point a ear has given up.

 

[Papermaker85 5,000+ posts]

At 140db huh. So you mean well past the point a ear has given up.

doesn't mean the woofer isn't linear dickwad

 

[LosIsATool 5,000+ posts]

doesn't mean the woofer isn't linear dickwad

Doesn't mean the box, cabin gain, and tune is linear.

I figured you would have learned something over the last week of crap.

 

[Papermaker85 5,000+ posts]

Doesn't mean the box, cabin gain, and tune is linear. I figured you would have learned something over the last week of crap.

Start wot thread so I can destroy you.

You make NO sense

 

[Papermaker85 5,000+ posts]

Op. It would be pretty much dead even between the two.

If you can get tge 3500 for 350 or so I'd do it..

 

[Papermaker85 5,000+ posts]

Op the platform 3 is right at 490. I'm pretty sure the 3500 is closer to 490 as well. If you could swing the 490 the pf3 is a feisty woofer..

 

[LosIsATool 5,000+ posts]

Start wot thread so I can destroy you.You make NO sense

Destroy me? You got laughed off the forum. You had amp builders and champs saying you are full of crap. You have no idea what good music even sounds like. You have no idea what a 2 channel is supposed to sound like.

But you think you can say what sounds good.

 

[Papermaker85 5,000+ posts]

Destroy me? You got laughed off the forum. You had amp builders and champs saying you are full of crap. You have no idea what good music even sounds like. You have no idea what a 2 channel is supposed to sound like. But you think you can say what sounds good.

no one proved ANYTHING. I even offered to go into discussion with the amp builder and HE REFUSED.he also made a stupid test format.

I build my own drivers with my own topology that isn't used. you have no clue what it takes except hook up a RTA sweep each channel add in alittle EQ and match sound intensity on each driver with a RTA/MIC. its really not very hard at all. building an actual high-end, high performance driver that people will use to compete is a different ball game completely. like i said I'm not going to argue with you or anyone when you aren't on my level.

Again you claim I didn't design my own woofers and mids i'll gladly give you my contact information so the build house can tell you then aren't allowed to give you any INFO. ROFL

you think I don't know ****? I've just been build system since 12 years old not to mention competed and WON before i had a license. since i want to say 2008 or 2009 I've hade several prototypes built. years of testing researching and learning the physics behind making good driver and applying it to prototypes.

you have a simple system with a DSP that is really easy to use and tune now n days. In 20 minutes I could show anyone how to use even a highly advanced DSP.

 

[LosIsATool 5,000+ posts]

no one proved ANYTHING. I even offered to go into discussion with the amp builder and HE REFUSED.he also made a stupid test format.

I build my own drivers with my own topology that isn't used. you have no clue what it takes except hook up a RTA sweep each channel add in alittle EQ and match sound intensity on each driver with a RTA/MIC. its really not very hard at all. building an actually high-end, high performance driver that people will use to compete is a different ball game completely. like i said I'm not going to argue with you or anyone when you aren't on my level.

Again you claim I didn't design my own woofers and mids i'll gladly give you my contact information so the build house can tell you then aren't allowed to give you any INFO. ROFL

you think I don't know ****? I've just been build system since 12 years only and competed and WON before i had a license. since i want to say 2008 or 2009 I've hade several prototypes built. years of testing researching and learning the physics behind making good driver and applying it to prototypes.

you have a simple system with a DSP that is really easy to use and tune now n days. In 20 minutes I could show anyone how to use even a highly advanced DSP.

Lol no clue how to run a RTA?

You wouldn't even know how to assign inputs.

You are a jobless bum.

Remember. Music should be painful right?

You don't even understand driver matching last week.

 

[Papermaker85 5,000+ posts]

Lol no clue how to run a RTA? You wouldn't even know how to assign inputs.

You are a jobless bum.

Remember. Music should be painful right?

what the ****? you a *******. kmsl

assign inputs? I trouble shoot and write PLC programs are you ******* kidding me?

https://www.bing.com/videos/search?q=rs+logix+5000&&view=detail&mid=47ECBDB20C8647AD245447ECBDB20C8647AD2454&FORM=VRDGAR

you have got to be the stupidest person i argue with. this is beyond retarded

look up ladder logic. RSlogix 5000,Delta V and SCADA.

these programs control automatic machinery In automated factories. a ******* DSP is Childsplay. kmsl