Dayton Hpsa500/hpsa1000

[dvcevoblack 10+ year member]

Is impossible to have these amp do a 2 ohms load? it only shows 8 or 4 ohms.

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=300-806 or http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=300-808

Click to read more...

 

[Railrocker 10+ year member]

Says loads lower than 4 ohm is not recommended and would void the warranty so I would have to say no.