Da ***?

[xShoWTeKx 10+ year member]

ok so i have a stock radio wired in with a LOC (line output converter) and the right side rca wasnt putting out a signal and it wasnt the input wire i checked that it was fine so it was the box then i ordered a new 1. this 1 (WoofersEtc.com - SGN12 - Stinger High Power Line Output Converter) right there and i got it installed now there is barley any bass at all the LOC has its own ground but it says its optional and im going to ground it and see but anybody got any other reasons or ideas cuz i got nothing?

Click to read more...

 

[rich1268 10+ year member]

check the polarity going into loc from the source if you are 180 out of phase than that would cause your problem

 

[xShoWTeKx 10+ year member]

check the polarity going into loc from the source if you are 180 out of phase than that would cause your problem

nope its good

 

[All_Logix 10+ year member]

Does the LOC have a control knob, most of the ones I have put in actually have a sensitivity knob, real small, it might but turned all the way down

 

[xShoWTeKx 10+ year member]

Does the LOC have a control knob, most of the ones I have put in actually have a sensitivity knob, real small, it might but turned all the way down

no this 1 doesnt

 

[xShoWTeKx 10+ year member]

anything anybody?

 

[xShoWTeKx 10+ year member]

well grabbed a friends amp hooked it up and it works idk what happened in 2 days with mine but oh well after pure abuse of a complete pos amp time to upgrade gota get some $ up