Could someone from sundown confirm if this is normal (SA8v2 d4 reading 3ohms)

[mylows10 5,000+ posts]

prolly fine , maybe jacob will see this and chime in .in any acct sounds like your ok

 

[esmokah 10+ year member]

so you have a set of d4s and a set of d2s? the d4s are reading 3 and the d2s are reading 2?

 

[htownrsx 10+ year member]

That is correct.

so you have a set of d4s and a set of d2s? the d4s are reading 3 and the d2s are reading 2?

 

[esmokah 10+ year member]

I bet it's a typo on the site saying the d2 should have 3.36 re. I still think you are good2go on all of those drivers.

 

[htownrsx 10+ year member]

Ok cool. I would just like someone like Jacob to reassure that it is indeed ok, not that I don't trust you!

I bet it's a typo on the site saying the d2 should have 3.36 re. I still think you are good2go on all of those drivers.

 

[esmokah 10+ year member]

I wouldn't trust me either. I installed my whole system myself and I don't even have a dmm. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Happy Bumping

 

[momax_powers 10+ year member]

Ok cool. I would just like someone like Jacob to reassure that it is indeed ok, not that I don't trust you!

i just tested both of my sa8v2 d4

DDM with no load = 0.3 ohm

DDM on each coil separately = 3.3 ohm (both subs yielded same results)

Therefore all coils are 3.0 ohm

i think you are fine