Complete plexi glass box?

[ramos 5,000+ posts]

3/4 " at least, and you will still probably need to brace it in the middle. Cause the panel will be flat, and quite large. Especially with high power used now a days. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ramos 5,000+ posts]

well ya that is jus the dimension for the front of my box..... i guess what i didnt think about is that i should do the center divider in plexi too or else it just may look like shit...... ok and u mentioned that i would need to use nuts and bolts..... and im not sure if i wanna do this if im gonna have to remove the top of my box to mount my subs... or maybe i can drill the hole pattern and glue the nuts to the back of the hole on the inside! ooooo that might work!.....wouldnt it im kinda looking for alternatives to taking the top of my box off to mount a sub.....

Ca glue used sparinglyworks quite well for that exact purpose. When you pull the subs back out of the enclosure ( eventually) you will have to re glue the nuts. But no biggy. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Ctminime 10+ year member]

are you saying that it is possible that if i do this wrong that my type-Rs could break this stuff?

 

[Ctminime 10+ year member]

what in gods name is "ca" glue? i can honestly say that i have never heard of it

 

[ramos 5,000+ posts]

are you saying that it is possible that if i do this wrong that my type-Rs could break this stuff?

If you use too thin of a material, just like with any other building material. yes you can break it. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ramos 5,000+ posts]

what in gods name is "ca" glue? i can honestly say that i have never heard of it

Super glue my brother. It's Cyano Acrylate or something like that. It's called ca glue at hobby shops. Which is the best place to buy large bottles of it, and accelerators. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Ctminime 10+ year member]

any suggestions on bolt size?

 

[TypeRBass 10+ year member]

CA glue is god.

 

[Eldorado 5,000+ posts]

I hope you know how much 3/4" plexi costs, its not cheap at all

 

[squeak9798 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/iagree.gif.15d6c075ee8d3913ba26866d06993068.gif

https://selectproducts.com/shopsite_sc/store/html/page41.html

 

[Ctminime 10+ year member]

**** i guess i never realized how freakishly expensive this stuff is..... but now i kinda got my heart set on it

.... hmm might have to rethink this process...

 

[Bigrick31 10+ year member]

check ebay for the plexi. but yes it iw quite spensive! i got a 3 sheets of 3/8 4ftx6ft for about $80 on ebay

 

[Eldorado 5,000+ posts]

I swiped some from rick, saved me a but load of money.

It was smoked plexi too //content.invisioncic.com/y282845/emoticons/smokin.gif.f1dc8d2acb1809e863ebd6a47eaa0d45.gif

 

[cxixer 10+ year member]

Forum dedicated to plastics - http://www.able-audio.com/forum/phpBB2/viewforum.php?f=9&sid=2db944b4b0069d18cfdad53fe6ea04eb