Clarion vxd935vd NO POWER

[armani2 10+ year member]

HI, I have a 04 Celica In which I installed, A Clarion VXD935VD DvD head Unit, After first installation It worked great with my JL-500/1, 2-JL W#v2's, JL-300/4 etc..... After a month

I removed the Head unit and hide away box and wiring harness,

had to have some repairs done on the interior, I then re-installed the head unit wiring harness and brain, Now I have a problem, The only thing the unit does is release a cd, as one was in the unit when I removed it, no lights, no nothing, but when I press the eject button it makes the eject motor activate so I know its getting power, that is about all I know, I have checked every fuse, checked the wiring, unpluged all but the original unit IE: removed rca's to the amps removed the power turn on to the amps, Now its basicly sitting on my seat with the wires attached

power ground, din to the brain and harness to the brain??????

I found one person on the net that had this problem but no replys, If anyone know what could be going on pleas let me know,

Like I said nothing has changed from the first install to this one?

no blown fuses by accedent it was a clean install...

Thanks....

Marcus

Click to read more...

 

[worm 10+ year member]

all i can say is double check your wires, use a volt meter to check your harness to make sure all of the connections are good. then make sure you press the power button to turn it on, they usually dont turn on by themselves the after they have been disconnected, the battery was disconnected, or if the unit is brand new.

 

[LSCCEO 10+ year member]

You may need to take the deck and brain to a shop and let them stick it on the test bench where everything is known to be working properly ('cept your deck *LOL*).

 

[armani2 10+ year member]

That problem was fixed due to a bad wiring harness, thanks