Cheap soundproofing material

[bigbangtheory 5,000+ posts]

Fatmat has been fine in my car for close to a year in my trunk. Did the doors a couple months ago, and seems fine as well. Nothing bad to say, but mine did stink for a couple days, but roll the windows down and was fine after a couple days.

Also have second skin and is nice, but cut the shit out of my hands, something else fatmat didn't do. For the money, I have nothing bad to say about it.

 

[iamamp3pimp 5,000+ posts]

it never, ever, ever smelled in my car

ever

 

[ramdaspadhye 10+ year member]

it never, ever, ever smelled in my car
ever

x2... I've got 2 layers of fatmat on the roof, rear wall, doors, and floorboard and it doesn't smell one bit, and I live in the midsouth where it gets VERY hot and muggy.

 

[bigbangtheory 5,000+ posts]

Mine smelled, but I can smell everything! I should be a private eye or something, lol!

 

[2000LaDe 10+ year member]

Mine smelled, but I can smell everything! I should be a private eye or something, lol!

wanna smell my *** and guess what i ate lastnight?

 

[silver07 10+ year member]

My fat mat didn't stick very well...

 

[2000LaDe 10+ year member]

heat the sh!t up and it sticks fine.

 

[silver07 10+ year member]

It was a 105 degrees outside and i left in the sun for like 10 min how much more heat did it need?

 

[chaunb3400 10+ year member]

i get peel n seel for 2bux a roll, i have used alot of it and no problems yet and the smell is not as bad as ppl make it out to be...if u wat something cheap get sum peel n seel , and if ur not satisfied then u wnt be out of much money

 

[2000LaDe 10+ year member]

It was a 105 degrees outside and i left in the sun for like 10 min how much more heat did it need?

a heat gun at it hottest setting. u would have 0 failures with it.

 

[silver07 10+ year member]

No heat gun used the sun and a cheap hairdryer

 

[2000LaDe 10+ year member]

ahhh... i use a heatgun and it works VERY well. also use a sprocket type roller instead of a flat wooden one. seems to work well. gives more pinpoint pressure. to each is his own though.

 

[silver07 10+ year member]

Sorry to thread jack but where can i get a cheap heatgun and this roller you speak off? i still got like 20 ft of it left.

 

[Buck 5,000+ posts]

Newspaper //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[btdickey99 5,000+ posts]

I also used Peel and Seal on my Jeep(last vehicle) 2 layers on the back and roof and never had a problem with sticking or smell.

HeatGun FTW