kicker10L7mark
Junior Member
Hi guys!! I have recently installed a 1F cap and after charging the cap to approx 8 volts (advised by car audio installer) all seemed ok but then my car battery started to die, so obviously the cap was draining the battery somehow. I think i should of charged the cap to 12 volts to equal the battery volts. Now when im trying to "charge" the cap back up to 12v with 100 ohm resistor the LCD is flashing a "9" and the green light is flashing as well.
Also when i disconnected the cap and check its volts it was 0v (no charge). therefore i didnt bother to "Discharge"
cap brand unknown.
Need help what this flashing means. Instructions manual didnt specify aswell ;-(
Thanking you in advance!!!!!
Also when i disconnected the cap and check its volts it was 0v (no charge). therefore i didnt bother to "Discharge"
cap brand unknown.
Need help what this flashing means. Instructions manual didnt specify aswell ;-(
Thanking you in advance!!!!!