Can i go ported?

ThumpinTitan
10+ year member

Thump!! Thump!!
I have a sealed box right now that is 2.1cubes before sub displacement, is there any way i can go ported for 1 12" SSD using Aero's?

What would be the best size, location & Tuning/Length of port?

Cant go any bigger on enclosure as it was made to replace my front center seat and dont want to have another built



 
yeah you could go ported. although its a small box yes you can. i would go with two 3" flared aeros. what tunning freq. r u shooting for?

here are your options:

Tuning Port Length (individual port)

33hz 7.73" each

34hz 7.25" each

35hz 6.81" each

36hz 6.4" each

37hz 6.03" each

38hz 5.68" each

kewl?

then for placement you can put the ports facing backwards if you have enough room. i dont think you want them shooting into your face haha

 
Freq. im not sure, whatever has good punch with some deep lowz

The back wall has a slight angle inwards, do i need to have the ports a certain distance off the floor and from eachother?

I dont mind the ports facing up either... There's 9" of mounting depth if that matters any

 
Freq. im not sure, whatever has good punch with some deep lowz
The back wall has a slight angle inwards, do i need to have the ports a certain distance off the floor and from eachother?

I dont mind the ports facing up either... There's 9" of mounting depth if that matters any


look up^^^^ edited my last post there are you options! for the port you want them atleast an inch away from the wall and an inch away from each other. i would go with 35hz. bu thats just me. oh and the overall length includes the flared port ends!!!! dont f up and only measure the connecting middle piece and not take into consideration the flared end pieces length.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ThumpinTitan

10+ year member
Thump!! Thump!!
Thread starter
ThumpinTitan
Joined
Location
San Diego
Start date
Participants
Who Replied
Replies
6
Views
508
Last reply date
Last reply from
ThumpinTitan
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top