Bypassing Parking brake sensor for pioneer flipout?

[jnoel]

I have a pioneer AVH-p7490dvd indash with a pioneer AVMP9000r brain i am having trouble in getting rid of the screen that says this opperation cannot be done while driving... i have been told to ground the green wire that comes off the brain buth when i do this nothing changes..in the slot where the green whire comes out there is an additional wire that is yellow with a black stripe that says "guide on" i dont no where of if i need to hook this up...please help me wire this up so i can use the screen without wiring it up to the parking brake....thank you....if you have a diagram it would be very helpful...

Click to read more...

 

[patrick1202 10+ year member]

eh maybe someone will come and help you im not sure how you do it i would sorta like to know to for future reference

 

[patrick1202 10+ year member]

whooo im caraudio elite lol

sorry i just thought that was cool

 

[btnhfan 5,000+ posts]

The older models worked like that. Not sure on the new ones.

 

[davidfre21 5,000+ posts]

i used a switch. Connect the e-brake wire to one end and ground the other... then when ever u wanna use the screen just flip the switch.

 

[patrick1202 10+ year member]

they should i've seen it done before just don't know how

 

[jnoel]

morning bump

 

[NeverEnuffBass 10+ year member]

You need a pulsating ground, easiest way to do this is to install a switch in between the source and the ground of the green wire.

 

[jnoel]

well what is the yellow/black "guide on" wire that comes out next to the green wire for or where do you hook it up?

 

[qtipextra 5,000+ posts]

Have you reffered to the installation manual? It should say where the yellow/black guide on wire goes

 

[jnoel]

bump

 

[qtipextra 5,000+ posts]

How can you bump this when you have been asked a question to help you, but you havnt repsonded to it yet?

 

[fsrenduro 10+ year member]

Try:

http://www.avic411.com/forum/

I'd bet the wiring is similar and they have detailed instructions on how to bypass this for most of the AVIC systems.

 

[jnoel]

alright thanks for your help

 

[Towncar 10+ year member]

i used a switch. Connect the e-brake wire to one end and ground the other... then when ever u wanna use the screen just flip the switch.

^^ like mentioned above, the question was answered long ago in this post!!