this is all zapco stuff here. ok i got a set of ref blue 5 1/4 and some ck16 6 1/2 speakers a tweets for both of these. well the i have to specific questions. First i alrdy have the ck16. installed in the front doors & i am trying to decide where to put the ref blues. Should i put them up front and run a 3 way front and no rear or run the ref blues as the rear fill? i drive a sedan so people do sit back there and i notice when i was back there my stock speakers sound like poopie shizzle. well i have one more option i could run a 3 way front and then have some i-force 6x9 in the rear which is what i think everyone will suggest but i am not sure if i am going to buy those or not and i will also be running the iforce speakers off of the hu power not the 4.0. Now for my other question, i am going to have the ck16 and ref blues and if i had both of them biamped & bridge on the 4.0 would this work for maximium power to the speakers and tweets? I am wanting to make sure i am having enough power if i had all the hooked up to the 4.0. I am also not sure if i'll hear stereo then and run a real active 3 way. I eventually will have a dsp6 in the future but for now 4 tweets and 4 speakers will be powerd by this amp. Or is there a better way to wires all 4 tweets and speakers to the 4.0?
I am a lil confused so some help would be helpful.
