Ball Park Estimate Cost for this Install Labor only

[I Like Waffle]

to perform that job i work out of my own shop for myself with no overhead i would usually charge about 200 bucks. I find stereo shops to be ATLEAST twice what i charge, and generally have lower quality work.

 

[mikehockey 10+ year member]

The comps are polk momos. The xplode amps are from 1996ish.

 

[mikehockey 10+ year member]

Just gettin back into the game.

 

[slammedincouch 10+ year member]

Shops are going to cost you an arm and a leg and most likely do it in a way that after you have the car for a few weeks, you're going to be on here complaining about something not sounding right or looking/being half assed. Then you're going to go back there and bitch them out about it, to which they'll say fuck off we have your moniez, and then you'll curse yourself for spending the time and effort on something you could have done better yourself. Seen it happen; had it happen. Go look through some of the old threads of people complaining about most shop's quality of work on here.

 

[Worlddre 5,000+ posts]

I would like to get this gear installed in my car (I already own all this gear) and was wondering if you guys could come up with a resonable ball park price for installation costs of this gear so I know I'm not getting ripped off when I walk in.
1. I'd like an Orion XTR 12" sub powered by a Phoenix Gold TI600.2 amp in the trunk.

$75

2. Rear components 6 1/2' with tweeters in the rear, powered by a sony xplode 404-eqx

$80 for the components and $75 for the amp

3. Front components 6 1/2' with tweeters in front, powered by a sony xpode 604-eqx

$80 for the components and $75 for the amplifier

4. Install the head unit in the dash.

$55 if single din no screen non-nav....$75 for a screen....$125 for a screen with nav

I have all the rca cords, like streetwires, etc. This is going into a 2002 Pontiac Grand Am GT Sedan. What do you think resonable labor charges would be for a job like this, without getting ripped off? Thank you immensely for your help in advance!

prices above would include fabricating whatever adapters were needed to fit the speakers in either location. These are what you would get quoted at my shop.