AUTOTEK 7600 BTS(Bass Thrust Series)

electropro
10+ year member

Member
I have this amp and it says 600 watts @ 4 ohms.I know it has more power than this I just dont know how much. If anyone knows the specs on this amp it would be helpful. What ohms is it stable to? What should I fuse this amp at since it has no fuse on it? Does it have an unregulated power supply? Class ? It is an oldschool amp and I would like to run it, just need some info. It was made by ZED audio //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif . I have searched the internet but found limited info. Any help would be appreciated. I found a pic on here of one but it is not the same. Mine is more grey with a blue lable that reads "7600BTS 600W @ 4OHMS"

 
Here are the specs for that amp!!

Autotek 7600 BTS

Output power at 11.5 to 14.4V:

2 x 300W @ 4 ohms (0.015% THD)

2 x 600W @ 2 ohms (0.15% THD)

1 x 600W @ 8 ohms bridged (0.015% THD)

1 x 900W @ 4 ohms bridged (0.15% THD)

1 x 1100W @ 4 ohms bridged (0.5% THD)

Designed by ZED AUDIO

 
I have been searching for info on this amp for a while now. The amp I keep seeing is just like the one in the ampguts link. It says "High performance amplification" on the black label. My amp looks pretty much the same except it says "High definition amplification" on a blue label.//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif Also, the bass, treble, and gain knobs are arranged differently. I have a push-button filter on my amp also. I guess they could be different year models.??? I have tried to E-mail ZED a couple of times with no replies. I will keep trying. I thank you for the replies and I will post some pics here and on ampguts when I get a new camera, since it decided to take a swim one day. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

electropro

10+ year member
Member
Thread starter
electropro
Joined
Location
North Florida
Start date
Participants
Who Replied
Replies
4
Views
9,037
Last reply date
Last reply from
electropro
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top