1. Product:
1 Epicenter, 1 EPIC-160
2. Specs:
Epicenter
Patented Digital Bass Reconstruction Processor
Cool, Flashing EPICENTER Logo Tracks The Bass
Bass Maximizer Control Get The Most From Every Woofer
Phase Coupled Activator Technology
Wired Remote Control
Woofer Protection Circuitry
Dash-Mounted Remote Control
Maximum input level: 15 Vrms
Maximum output level: 13.5 Vpeak
Frequency response: 10Hz-100kHz;+/-1dB
Total harmonic distortion: 0.003%
Signal to Noise ratio: - 130dB
Balanced input noise rejection: > 60dB
Input Impedance: 10 Kohms
Output Impedance: 150 Ohms
Power supply: High headroom PWM
Power draw: 150mA
Recommended fuse rating: 1 Amp
Dimensions: 8"W x 5-1/2"D x 1-1/4"H
EPIC-160
in-dash bass processor/SPL meter
increases bass response from your system
speaker- and preamp-level inputs
SPL meter displays sound pressure level or battery voltage
built-in microphone
frequency response: 10 to 100,000 Hz
6-3/4"W x 5"H x 1"D
weight: 2 pounds
3. Description/Condition:
Used condition, not the greatest visually but function as they should. EPIC-160 missing volume knob and input plugs.
4. Price: :
Will be sold together. $100 shipped for both
5. Pictures:




(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
1 Epicenter, 1 EPIC-160
2. Specs:
Epicenter
Patented Digital Bass Reconstruction Processor
Cool, Flashing EPICENTER Logo Tracks The Bass
Bass Maximizer Control Get The Most From Every Woofer
Phase Coupled Activator Technology
Wired Remote Control
Woofer Protection Circuitry
Dash-Mounted Remote Control
Maximum input level: 15 Vrms
Maximum output level: 13.5 Vpeak
Frequency response: 10Hz-100kHz;+/-1dB
Total harmonic distortion: 0.003%
Signal to Noise ratio: - 130dB
Balanced input noise rejection: > 60dB
Input Impedance: 10 Kohms
Output Impedance: 150 Ohms
Power supply: High headroom PWM
Power draw: 150mA
Recommended fuse rating: 1 Amp
Dimensions: 8"W x 5-1/2"D x 1-1/4"H
EPIC-160
in-dash bass processor/SPL meter
increases bass response from your system
speaker- and preamp-level inputs
SPL meter displays sound pressure level or battery voltage
built-in microphone
frequency response: 10 to 100,000 Hz
6-3/4"W x 5"H x 1"D
weight: 2 pounds
3. Description/Condition:
Used condition, not the greatest visually but function as they should. EPIC-160 missing volume knob and input plugs.
4. Price: :
Will be sold together. $100 shipped for both
5. Pictures:




(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).