Audio Control four1i

[subzero 5,000+ posts]

Hey guys.

Well, I tried to sell this Audio Control Four1i here is link to specs and internet prices...

http://signature.crutchfield.com/s_161FOURP1/AudioControl-FOUR-1.html?tp=116

I guess I decided to keep it because selling it proved to be difficult.

So, how do I make this make this work for me?

My system components are listed in my sig. What I am wondering is how to use this to my advantage?

I have the subs RCA pluged to the rear/sub output from the deck, switched to sub out.

The front channel is running the four channel amp hooked to my front and rear speakers.

Should I hook up the Audio Control Four1i to the front RCA and use it before 4.880. Use it to control the sound stage better and increase the voltage on the RCA signal?

Let me know what you would do.

Click to read more...

 

[DBfan187 5,000+ posts]

run the front RCA's out into the 4.1(needs to be full range so set everything flat), use the 4.1 to control everything.

 

[subzero 5,000+ posts]

ok

even the subs? or just the speakers.

 

[DBfan187 5,000+ posts]

No.

It takes 1 pair of inputs, your fronts like I said, and from there it controls everything. Use it or your deck, but I wouldn't do both.

 

[subzero 5,000+ posts]

ok I gotcha. I will do that and see how it sounds. Thanks.

With the line driver. I have a DMM, what voltage should I shoot for?

 

[DBfan187 5,000+ posts]

turn the gains on it to the max, then set your amps up as you would without it