Audi A6 Overhaul Worklog (glass/stroker/doorpod content)

[yacob.naif 10+ year member]

Started working on my car again today, and took some pics.

I feel like throwing up from the poly resin, so this is going to be brief for now...

here's the pics:

The Monster cable speaker wire i got for my door speakers:

The funky stroker mounting hardware... You actually have to pre-drill holes, and then stick these steel blocks inside the enclosure before mounting, and then you bolt the speakers into the steel blocks..... Ingenious idea, but it took about 3 hours just to mount the **** things:

Finished Product:

Baffel for the doorpods:

Speakers in bags, mounted to the baffels, ready to make a skeleton:

One of my passives, posing next to the Parts Express Box:

Completed fiberglass rear door speaker deletion, fully upholstered in vinyl, and installed:

Other door:

Click to read more...

 

[yacob.naif 10+ year member]

Gutted front door, awaiting doorpod:

Speakers mounted to the baffel, prior to cutting:

Can of coke for size comparison:

Monsterous side view: Yes, those are 10's //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

 

[yacob.naif 10+ year member]

Who says you can't use the drivers themselves as a skeleton? Lazy ingenuity FTW!

Why i will have NIGHTMARES about chopmat tonight. The ****'s a pain in the ass, but these pods are going to be strong, like bull.

Anyways, sorry some of the pics are out of order, i've been inhaling fumes for too long now, and need to relax and have a beer.

And before someone chimes in with "how the **** are those woofers going to cool through the vent if they're right up against the enclosure, my answer is **** you!

Actually, no, that's a good question. I'm going to mount the woofer on a double baffle, so the pole vent will be 3/4" from the rear of the pod.

And the baffle itself is self-enclosed, but the finished assembly will cover teh entire part of the door that has been gutted, and look very similar to the pics of the rear door panel deletes pictured above, with of course, the addition of very large drivers tossed in for good measure.

Le'me know what you think!

I'm gonna go throw up, or relax, or something, i can't even think //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[yacob.naif 10+ year member]

Oh, and that mat was smoothed out before i called it a night

those final pics were between coats, before i went over it with my roller

 

[2kchevy06civic 5,000+ posts]

sweet

 

[baseballer1100 5,000+ posts]

I cant wait to see this what year is the car?

 

[yacob.naif 10+ year member]

I cant wait to see this what year is the car?

It's a 99.

Getting old, but any newer and i wouldn't even think about 'trying' something like this on her.

 

[mattmcss 10+ year member]

ah yeah, that'll be loud, amps ?

 

[baseballer1100 5,000+ posts]

It's a 99.
Getting old, but any newer and i wouldn't even think about 'trying' something like this on her.

I was gonna say **** hes gots some balls lol

 

[Big Dee 10+ year member]

Anxiously awaiting the finished product.

 

[yacob.naif 10+ year member]

ah yeah, that'll be loud, amps ?

Got an opti500x2 for the fronts, which will be running at 8 ohms, so ~240w rms x 2.

And i've got an opti4000D locked away in my office that's just waiting to unleash hell on the strokers.......

 

[baseballer1100 5,000+ posts]

uh oh this is going to be sick.

 

[kicker06 10+ year member]

Wow, that is a beastly front stage.

Makes my SSCS6's look like little muffins.

 

[supa_c 5,000+ posts]

lol, got enough resin on them pods

 

[baseballer1100 5,000+ posts]

Where are you working on these at?