AQ SDC2.5 or Dayton RS ?

[itzme218 10+ year member]

SDC2.515 RSS390HO-4 15" High Output

Woofer Size 15"

Fs 30 Hz 21 Hz

Qts 0.655 .37

Qes 0.799 .41

Qms 4.097 4.10

Vas 88.74 4.60 cu. ft.

Le mH 1.88 1.90 mH

Sensitivity 1W/1m 90 dB

Magnet Weight 140 oz

Coil Diameter " 2.5"

Useable Throw 2.3"

Continuous Power 600

Music Peak Power 1200

Mounting Depth 7.5"

Circle Cutout 14"

At the same price which wooofer would be better, please don't just SPAM AQ because "better brand/ bandwagon" Thanks. Power handling the Dayton takes a tad bit more, but I don't have that much to power it anyways. Because of the SVC factor, the dayton would get 400each @ 2ohms, and the AQ would get 600 each @ 1ohms. Box size would be about 1.75^3 per driver and tunning would be around 35hz. But if I get the dayton's I'm going to tune to 30.

Click to read more...

 

[mlstrass 5,000+ posts]

Never heard the Daytons, but I was rather impressed by the SDC install I did a few months back. They'll take 600 no problem.

What size subs you doing in 1.75 as you listed a 15"?

 

[wu501 10+ year member]

are you going for sq or spl? The AQ would win in the spl department hands down. The dayton would have much better SQ. The dayton could be sealed and the AQ really needs to be ported.

 

[mlstrass 5,000+ posts]

You've heard/compared the Dayton and AQ? My HDC's have VERY good SQ and I've compared them to: RL-P's, FI Q, SSA Icon, 13W7, Adire Tempest, Assassin and liked the HDC's better then all of them. Doubt the HO sounds any better then those listed...