Aq 2200d

[wildbeasts3-10 10+ year member]

As Anyone wired 2 Audioque 2200D's down to .125 ohm each?

Click to read more...

 

[PSturmer 10+ year member]

wont work

 

[RipDaJacka]

that wont work man, i want 2 AQ 2200d's !!!!

 

[skateboardkid 10+ year member]

the amps see half of the input resistance so your at an eighth of an ohm or half of that at each amp, more like at .0625 ohms per amp at that point. not gonna work buddy, lots of magic smoke is what I predict.

at 2 ohms and 16 volts with 10% THD it looks like you could make almost 7k out of a pair strapped!

for less thatn $800 from the dealer.

not sure of any amp that is stable that low, old school orions could, but you get no where near the power of a strapped 2200's.

 

[RipDaJacka]

i wanna strap 2 at .5each daily so 1ohm loadshare

 

[brtnboarder3241 5,000+ posts]

ia 20.1 have been tested that low, havent they? down to like .0825 or some ****..

 

[DBDRAGGUY 10+ year member]

No way, expecting these to perform that low is just abuse. If you wired them idividually(non strapped) I would say .5 ohm daily is as low as you could go.

 

[wildbeasts3-10 10+ year member]

So far Each seeing .5 ohm is working for me so far , i will probley not go any lower stapped, I will test them on my HD3 12's Sunday . I will post the score's after the show.