Anyone up for a huge challenge? What is the volume of my sub box?

[Intercooler 10+ year member]

Here is the best I can do with Paint. It is 44" wide with a .75" divider at the center seperating the two sides. It measures basically 10" in the front and tapers down at the back to roughly 6.5" with the mid-point being 8"H. It also has a 12"L 3.5"H step at the bottom to clear the hump in the middle of the truck. The ports on it are 3.5" Dia with a 4"L on the insert going into the box. This is the box I got of E-Bay used so I am trying to figure out subs to slam in it. I would like to go two 10" RE-SE's or similar if they will play right. Anyone know how much cubic ft. I have roughly per side?

Click to read more...

 

[Intercooler 10+ year member]

This is bigger but maybe still not enough

http://www.fullsizechevy.com/forums/attachment.php?attachmentid=143&stc=1&d=1132948842

 

[LightningStryk7 10+ year member]

1st one is to blury and second one u have to log in >_>

 

[Intercooler 10+ year member]

I can e-mail it. This site is limited on size and I wasn't aware you had to log in on the other one.

 

[Intercooler 10+ year member]

I modified it and put it on my space. Hopefully you can make it out now. Basically a tapered box running the full length of my seat in my Z-71.

http://home.comcast.net/~intercooler2/Box1.jpg

Need suggestions for two 10's that will pound in there too. Thanks!

 

[Intercooler 10+ year member]

Can anyone help me with this given the link to a better drawing I put up? //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Intercooler 10+ year member]

Anyone?

 

[Zacmc212 10+ year member]

about 2.6?

 

[ballstothewall 10+ year member]

I got 2.5 ft^3. That is taking into account the ports, and I assumed those dimensions are internal, if they aren't, say so and I will refigure.

*Edit*...That is total volume, not for each side

 

[Intercooler 10+ year member]

I didn't put it but those are external. All construction is 3/4" MDF. As long as I get 1.0 Cu.Ft. per side I am golden!