Anyone need a ported or sealed box design

[PV Audio 5,000+ posts]

I take my time when I design boxes, I have a calculator pen and paper handy, and just get to work...
If I sit down and do it all at once, usually takes an hour or two with a fully rendered drawing, and a rendered cutsheet and a .doc cut sheet.

This is true. Usually takes around 2 hours, and I really only use BBP to see the graphs of what it will look like, and to check my work. Anyone making a box design in 15 minutes either is Thiele himself, or doesn't know what the hell he's doing.

 

[bluelceii 10+ year member]

This is true. Usually takes around 2 hours, and I really only use BBP to see the graphs of what it will look like, and to check my work. Anyone making a box design in 15 minutes either is Thiele himself, or doesn't know what the hell he's doing.

hell I take almost an hour on the most simple designs... I haven't found any "quick routes" yet

 

[Calikid 5,000+ posts]

This is true. Usually takes around 2 hours, and I really only use BBP to see the graphs of what it will look like, and to check my work. Anyone making a box design in 15 minutes either is Thiele himself, or doesn't know what the hell he's doing.

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif i agree with birthday boy

 

[sxpimpin 10+ year member]

I would have to disagree until you can prove me wrong.

With that box i come up with a tunning of 31 hz...off by 1

Are you using 3/4 mdf for the port also?

taking into account of some added bracing?

 

[sxpimpin 10+ year member]

As for everyone else. I didn't know i would get this many requests it'll probably be tomorrow before i can catch up with all of you.

 

[bluelceii 10+ year member]

I would have to disagree until you can prove me wrong.
With that box i come up with a tunning of 31 hz...off by 1

Are you using 3/4 mdf for the port also?

taking into account of some added bracing?

yup... 3/4 mdf. no bracing... i'm good man don't worry bout it //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[sxpimpin 10+ year member]

Anyone who seriously needs a box design pm me.. or aim floridaguy1988

 

[sxpimpin 10+ year member]

Box for the 4 JL audio W3 12's

Right at 8 cuft 90inches of port tuned to 36hz for that LOUDness you were going for.

 

[DRMVP21 10+ year member]

2 pioneer ts-w3004spl. max dimensions are 38W x 14H x 21D. Powered by bxi1606d. 32hz tuning

 

[Octavio 10+ year member]

I'm feelin bored. Give me your max dimensions, subs and what your looking for sound wise and I'll give it a shot..

Desing a box for me please, I own a CVR12 Kickers 2 vioce coils , thanks

your help would be pay on the name of the lord

 

[sxpimpin 10+ year member]

Holy cow!!

If you need a box PM me I get to those first...

 

[sxpimpin 10+ year member]

Box for 3 memphis 10's Pm me for dimensions. Its right at 4 cuft tuned to 35 hz with 44inches of port.

 

[uhoh45 10+ year member]

30 long x30 wide x20 high top firing port 1 18 " woofer

 

[sxpimpin 10+ year member]

Box for the lexus and two rf hx2 12's.. 4cuft tuned to 35hz

32" wide 15" tall 22" deep

port 3" by 13.5 by 18 inches deep

 

[sxpimpin 10+ year member]

Box for the pair of L7 15's..

Right around 4.75 cubic feet per chamber tuned to 34-35 hz.