Any Experience with Knu Konceptz Krystal Kable Subwoofer RCA

[nateberrier 10+ year member]

any shielded rca is fine. monster is overpriced. knu will work

 

[crfrider 10+ year member]

yea well I have a set of Knu 4 channel krystal kable, and a set of 2 channel Knu Krystal kable right now, well I havent used them yet cause im in the process of getting a new vehicle for my stereo, I bought the RCAs just recently so I havent got to use them yet, well I bought the 4 channel ones for my 4 channel amp and the 2 channel for my sub amp, well I decided to use another amp that i have laying around with my build so I was just going to use the 2 channel i have to power it and buy a sub RCA for my sub amp, thats why I thought the Knu Sub cable would be good, but its home audio, so now I was looking at the Monster Sub cable which is very expensive, $80, so I wasnt sure if it really would make much difference, if not I will just buy another 2 channel Knu Krystal Kable

 

[nateberrier 10+ year member]

not really. the only reason the one is labeled for sub is because its a mono rca and home theatre uses mono for the sub. if you bought two it would work fine. anything gold plated or shielded will do a good job. the krystal is fine for this. you wouldnt notice a difference. esp not if you have 4v or better preamps

 

[crfrider 10+ year member]

well i have a 5volt deck

 

[RJesus 10+ year member]

I think your problem is your looking to increase your sub output, but your looking in the wrong place.

Do you think your system should be louder? Tell us about your system, and we can help.

RCA's most likely aren't your problem.

Your car's like an oven in the summer. Its like a freezer in the winter. It vibrates like crazy whenever you turn it on.

Home audio cables are not made to withstand these types of conditions.

 

[crfrider 10+ year member]

well for now my system consits of

Deck: Kenwood DDX-812

Front Stage Comps: TBA will be 2 sets of Kicker QS65.2 comps

Rear Stage Coxial: TBA will be 1 set of Kicker 3 way 6x9s

Comps Amp: Kicker ZX850.4

Coxial Amp: Kicker ZX150.2

Sub Amp: Kicker ZX2500.1

Subs: 2 Kicker L7 15s Dual 2s

Knu Konceptz KLMX 1/0 Gauge power and ground

Big 3 in KLMX

Knu Konceptz Flexx 4 Gauge

Knu Konceptz Kyrstal kable RCAs a 2 channel and 4 channel

Sub wire: Knu Karma SS 8 Gauge speaker wire

Speaker Wire: TBA will be Knu Konceptz Karma SS 12 Gauge for Mids, 16 Gauge for Tweeters

Batteries: TBA will be Kinetik HC2400, Kinetik HC2000

H/O Alternator: TBA will Be DC Power 270 or 300 amp

as of now my system is in the garage, in the process looking for a new vehicle, a tahoe, so i have been just piecing this together alittle at a time, im going to run all kicker, knu, and kinetik products, and eventually am going to get 2 more L7 15s and another zx2500.1, then replace the klmx with 2 runs of Knu Flexx, Power and ground but that will be in the future, well see I was going to buy another Knu RCA for my coxial amp, so I was thinking just buying a actual subwoofer RCA and using the 2 channel one I have on the zx2500.1 now, on the 150.2, but ill probally just buy another 2 channel Knu Krystal Kable RCA since the subwoofer rca wont make a difference.

 

[sulin's baby 10+ year member]

please tell me your friend johhny crackhead isnt gona help with your instal....for god's sake dont ever do that! as stated before theres a reason for left and right...that why its called car STEREO