Amp problems. Again..

[Dwayne614]

My SPL 1200 watt (z2x 1200) keeps going into what I think is protection mode. It flashes a red light once for about 4 seconds then the light turns off. Checked my wiring plenty of times wire still has good copper I also switched my ground and I have a new battery fuse. Weird thing is the bottom of my trunk seems moist but I don't see leaks. I also have an Orion 600 class D that goes into protection mode and I found water on the bottom of the amp in my trunk.. Is my amp done for? Any input is appreciated

Click to read more...

 

[CSCStang]

My SPL 1200 watt (z2x 1200) keeps going into what I think is protection mode. It flashes a red light once for about 4 seconds then the light turns off. Checked my wiring plenty of times wire still has good copper I also switched my ground and I have a new battery fuse. Weird thing is the bottom of my trunk seems moist but I don't see leaks. I also have an Orion 600 class D that goes into protection mode and I found water on the bottom of the amp in my trunk.. Is my amp done for? Any input is appreciated

Water+electrical=disaster. Take the amp out and let it dry out with the bottom off for 24 hours, then see if it will fire up.