amp load ?s

[lefty54 10+ year member]

I have 2 ?s, I just got the better audio 1600m1. Really nice looking amp.

this will power 2 ED 12As.

1. Now if I wire the subs for a dual 2 ohm load how much power will each sub get?

2. Also will I be able to use a 2 ga. wiring for this amp. the manual says

4 ga. or larger.

It also need a 100 -200amp inline fuse. heavy duty amp.

thanks

Denny //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Click to read more...

 

[xjmadness 10+ year member]

Originally posted by lefty54 I have 2 ?s, I just got the better audio 1600m1. Really nice looking amp.

this will power 2 ED 12As.

1. Now if I wire the subs for a dual 2 ohm load how much power will each sub get?

2. Also will I be able to use a 2 ga. wiring for this amp. the manual says

4 ga. or larger.

It also need a 100 -200amp inline fuse. heavy duty amp.

thanks

Denny //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

like i told u in the PM...the BE amp supplies 1000w total @ 2 ohm. Meaning u'll give a's only 500w a piece, IMO, that's not enough. I suggest u go ported to get the most out of your subs. And yes u can u 2 ga wiring for the amp

 

[nswartley 5,000+ posts]

are the 12a's DVC or SVC? whats the impedance on the voice coils?

 

[lefty54 10+ year member]

the 12As are 2 ohm DVC

 

[nswartley 5,000+ posts]

Originally posted by lefty54 the 12As are 2 ohm DVC

ok well if you have 1 sub, then you should wire them to a 1 ohm load off of the amp, and it will get 1600 watts (turn the gains down). if you have 2 DVC subs, then it will have to be wired to a 2 ohm load, which will give you less power.