Amp for CDT es-62as gold series

[BassDrop]

Anybody wanna help me out with this. I just bought a set CDT Audio es-62as which is 250w RMS at an impedance of 2Ohms. I currently have a t400-2 which Im pretty sure does the 250w. I also found a Audison LRX 2.4 that does 230w@2Ohms on 13.8 volts. I also have acess to an amo Its a Zapco 700.2 dont know what series it is It is a Gray amp with black. The zapco a local guy is selling it for 170. What should I go with?Also the T400-2 has 200 Damping whilst the Audison has 120 Damping on 4Ohm 1000khz

Click to read more...

 

[trumpet 5,000+ posts]

Congratulations on the purchase. Please email me. You have my address.

 

[BOOMINGRANDPA 5,000+ posts]

what does that 700.2 do? i'd think u want 100-150 per speaker..

 

[Papermaker85 5,000+ posts]

Id suggest you go active but if not Id get at least 300 watts per channel and get someone to professionally set your gains..

 

[BassDrop]

Why go active? Theres 3 shops where im from but they dont use O-scopes they tune it by ear which i can do that.Like around how much does it cost to get the gains set by a pro?Zapco does 350wx2 i guesa

 

[Papermaker85 5,000+ posts]

Not much. If you are going to keep the passives and you can hear when they are at there limit do it yourself. Active or biamping gives you alot more control.